From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
My Surface GO also refuses to boot Linux usb sticks directly (interestingly windows usb sticks are no problem).
What worked for me is creating a ventoy usb stick and then putting the iso on there.
If this does not work you can try to set the boot order from fedora with efibootmgr. More infos
Thanks I guess I’ll try that👍
Well apparently the Ventoy trick is working. At least it booted on it as Clonezilla is taking 4 hours to clone my disk. So for now I don’t have a definitive result.
I’ve tried with a usb-c ventoyed stick and I’ll also try with a usb-a with adapter ventoyed stick.
There are a bunch of options most are kind of complicated. As mentioned here before ventoy will get clonezilla running from a network boot. Without clonezilla, a few things I can think of are:
#1 just clone the system while it's running. Get a large external drive and sudo dd if=/dev/your_internal_disk of=/path/to/disk/image.img
If you want you can boot into single user mode to do this, it's will be less risky and you may be able to mount root read only. Note that this carries no risk for the source machine if dd is used correctly, only that the filesystem of a target machine may have to be repaired after the clone.
If you'd rather just clone partitions that would work this way as well.
The target machine would need a live bootable is to copy the disk image onto the target disk. Dd is a inefficient option but it's on almost every system. Use partclone instead of you can, same as clonezilla uses.
#2 expose your disks with network block devices. You'll need kernel support I think, but then it's basically the same as #1 but you can do the clone from a remote machine
#3 build empty filesystems on the other machines just copy all of the files. You can use nfs or samba but it would probably be better to tar everything to preserve file ownership and permissions using these protocols. Rsync would probably be best. after copying the files a bootloader would need to be installed and configured.
Well so just to give an update, while using Ventoy, everything works. It doesn't matter if you're using a Usb-A stick with an adapter or a Usb-C.
It's crazy to think that I've looked at so many tutorials and that the solution was so simple.
The surface Go is a lovely little Linux machine, but some stupid things are difficult on it.
You may not have to do a disk clone to replicate your setup. Have you used Git before?
Configuration for most packages is stored under your home folder in a directory called “.config” (the . at the front makes the folder hidden). Taking this folder and putting it on your other systems should replicate most of your setup. (Some other packages, like bash or zsh, will place configuration information directly under your home folder. Make sure you transfer those files and folders too)
That sounds a bit too complicated for me but I might do that if the ventoy trick doesn’t work. Thanks
If you haven't already tried a USB 2.0 flash drive, give that a go. I find they are less finicky to boot from than some 3.0 drives.
I’ve tried but only through an adapter as the surface go is usb-c only. It didn’t work..