The original post: /r/overclocking by /u/lawshadowz on 2025-04-16 08:00:39.
Hi all
My SP rating:
SP = 107
P-core quality 107
E-core quality 90
CPU - quality 101
They say i have a nice chip....
I tried this without ANY change in voltages i am new not want to go for benchmark records just lower the latency and a small bump in frequency.
Hardware:
Asrock Z890i Nova ITX
G.Skill CUDIMM 8800mhz (on QVL for my mb)
XFX 9070 XT Mercury Magnetic Air oc gpu
Corsair SF1000 psu
2 x Samsung 990 Pro 1tb
Test 1 "extreme profile power plan" in BIOS enable XMP
Memtest86 was a full pass (expected errors but none came thankfully)
Prime95 to stress the ICM and RAM for 1 hour no errors
Cinebench23 no issues with extreme profile and XMP nothing else changed.
Then...
I tried the following:
NGU: 34
D2D: 34
RING: 40
E core bump to 5.0ghz
P core bump to 5.5ghz
All done via XTU and did not fiddle with any voltages.
Result in C23 = crash after couple min...
Do i need more volt on RING and NGU and SA? What is it called under Asorock Z890 Bios?
Also latency is around 86ns...tested via AIDA.
What should i do? Just want a bump to 5.5ghz on e core and 100hz extra on the p core...
Also want to reduce latency more this can be done with higher RING correct?
However i don't want to put to much increase in voltages the above settings are these a mild oc?
An overclock member said "32/32 ~ NGU/D2D is a good target. Around 0.85v on NGU, Ring 40 at 1.1v is a good target. However where can i change the volts on those plus i remember with NGU it is fixed if its set at default or something like that....
Anyway pls be gentle with me i just want a simple bump in performance not here for benchmark records haha. JJust want it to stable in games, work related stuff (not heavy), some video edits, browsing, videos thats it im a simple user. Oh my system is custom watercooled.
Thanks in advance.