This is an automated archive.
The original was posted on /r/ubiquiti by /u/BackdoorConquest on 2024-01-23 08:35:51+00:00.
So I've recently got my hands on a UXG Lite to ~~play with~~ test for deployments in the company I work for and I've got some weird bandwidth results on my home line.
I'm in the UK on a Cityfibre line that is PPPoE and gigabit. The fibre runs through to a Calix 801G ONT and then via ethernet connects directly in the UXG. On my own PFSense setup I get easily around 900mbps+ at all times, on other routers I've tested with I get 800+ too
On the UXG Lite I am only getting 150 with all the security features off, smart queues too etc. With everything on I get around 100. These seems very slow comparatively to other results I've seen. I've had Unifi devices achieve worse results on PPPoE before, but I wasn't expecting it to be that affected?
I've played with MSS Clamping, I've tried changing auto auto negotiation too. So far, nothing.
This was adopted to a cloud controller, the site it was a part of had nothing else adopted but this. Tried through both my own dumb switch and also a Unifi 8 port switch.
I've logged a ticket but was wondering if anyone had any advice.