3DPrinting

18319 readers

57 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

[email protected]

I would venture to say this is bad (sh.itjust.works)

submitted 1 week ago by _thebrain_ to c/[email protected]

9 comments fedilink hide all child comments

This is my 400mm 110v silicone heat made on my bed. Suddenly nothing would stick toy bed any more, regardless of temp, offset, and adhesion assistance agents. I finally looked at the center of the bed was puffy. I was able to slide a ruler in between the aluminum bed and the pad. It took a bit of elbow grease to pull off the edges. Dunno how close to disaster I was but it's a little too close for comfort. It never overheated in all my use and the thermal fuse is still in tact but the scorch mark is still disturbing.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 1 week ago (1 children)

What printer?

[–] _thebrain_ 8 points 1 week ago (1 children)

Custom. It started life as a tronxy x5sa-400 but I think only 2 steppers and the frame are original still. I changed the bed to a 16"^2^ *3/8 thick aluminum tool plate about 5 years ago. It always worked well for me. Unfortunately the silicone mat I used doesn't seem to be made any more. I'm going to try one meant for a creality cr10 S4. I may have to re-machine the mounting holes for the thru holes on the mat tho.

[–] [email protected] 6 points 1 week ago (1 children)

tronxy x5sa-400

Ah you too decided to torture this printer.

[–] _thebrain_ 3 points 1 week ago (1 children)

I have had it since probably 2018? It was one of the original x5sa kits. Honestly it has been a good platform to learn off of

[–] [email protected] 3 points 1 week ago

I'm starting to build a voron trident on it.
For now I stripped everything and only have the base frame.