3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I need to print some improved tubing connectors, 3 different types - 80 Pcs total, for a pair of crappy shelving units my Wife bought off of Walmart. The originals were as minimal material as possible without missing the nylon tree completely.
The Klipperized Mk3s with a .60mm nozzle is nearly as fast as the mini with a .40mm nozzle. Once again proving it's not how fast you say you can go, but how fast the parts let you go..........
If you open Bambu Studio, and click on the edit box to the right of you machine type and look at the first tab under Basic Settings, and in the Advanced section, its says G-Code flavor-- Marlin(legacy). Now, don't mistake that for the firmware they use.