this post was submitted on 26 Aug 2024
10 points (100.0% liked)

3DPrinting

15541 readers
239 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

Has anyone here changed the Biqu B1 SKR v1.4 mainboard to SKR MINI E3 V3?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 2 points 2 months ago

Ok, let's look into it. (you can also send me your printer.cfg if you want) The Mini e3 v3 has the following switchable outputs:

  • HB - PC9
  • E0 - PC8
  • FAN0 - PC6
  • FAN1 - PC7
  • FAN2 - PB15

Keep in mind that they all switch ground only. 24V is always there.

You can use all of them for whatever you want, Klipper is very flexible here. HB is your heated bed, no questions here. E0 should be connected to your Hotted board HE0. I don't know which of the fans on your board does what, you may need to connect them all and see which one does what (I guess your hotend does not have 3 fans). in the end you want [hotend_fan] to be the one calling the hotend (not the part!). the [fan] will be controlled by the slicer (overhangs, bridges and so on).

DCIN on your board should ideally be connected directly to the PSU, you do not want it to be switched.

don't worry, we will get you back printing.