I bought a Unifi Express to upgrade my parents in law from an old orbi mesh system that I handed down to them. I'm hoping this will improve their network, and allow me to remotely help them more easily.

After receiving the device, I decided to first test it out in my network to see if it was a viable replacement for my USG-3P and my RPI4-4GB. TL;DR: it is not.

My setup: 1x U6 Lite 1x AC-AP Lite 1x AC-Mesh 1x Nano HD 1x USW-8-60W 1x Lite 8 POE 1x Flex Mini 1x USG-3P 1x Raspberry PI 4-4GB running pihole, Homebridge, controller 1x Raspberry PI zeroW running redundant pihole and critical redundant homebridge items Centurylink Symmetric gigabit fiber

I have around 35 smart home wifi devices and in generally around 55-60 total clients connected to my network.

I loaded a backup from my RPI4 controller to get started.

My initial attempt just failed, as I tried to like set it up while connected to my existing network. I was also just not used to dealing with a UnifiOS console device and the way that it works.

Loading the backup took like 30 minutes of an NFL football game, so I guess like 1 hour, but I did not time it exactly.

After getting it up and running I can no longer get the network application to load in my browser, it just keeps loading forever.

With nothing else happening, SSH to the console and running TOP shows that unifi-network-b process is using between 20-91% of the CPU. Load averages are around 4.5. The one good thing is that I was getting around the 940Mbps up and down at first, but it always starts out a bit slow at around 45Mbps, then it gets faster after about a second. Today I'm seeing 940 down and 500 up. Not sure if it is ISP or the device just getting slow. When I was using my USG-3P I normally see the symmetric 940 jump up to full speed immediately, without the initial hang up at 45Mbps.

Ultimately, it is nice to see that it can prioritize the internet to do its primary job when it is just completely swamped by relatively modest network I have setup.

This shows me that my true path forward is definitely the UXG-Lite while maintaining my RPI4 for the controller. I have no urgency to replace my USG-3P, but I would like to have the UXG-Lite at least available for shipping before the USG-3P crapps out so I am not caught with my pants down. I do have the ISP router I can pop in for an emergency, but I would like to stay in the ecosystem if possible.

I will post another update after I setup the gateway at my parents in law's house.

Ubiquiti makes some pretty great products, but too many of them are constantly out of stock. I was definitely giving them a pass in 2020, 2021 etc, but this is starting to look like it is now intentional. They are simultaneously out of the express, uxg lite, UDR, and the USG-3P. The only non rack router that is available in the store is the UDM, which they are no longer advertising without searching for it.

I know that the express and uxg lite are brand new, so maybe they can get a pass. The UDR has been out for well over a year. The UDM is just sort of too expensive to be bought without wifi6, and appears to be on the way out.

Further, the U6-lite is also sold out. This just forces people to pay an extra $30 for the U6+ with wifi6 on the 2.4GHz radio, and I'm not really aware of anything that uses wifi6 on 2.4GHz (maybe new mobile phones etc, but they will be defaulting to 5GHz...).

Ubiquiti even hired some B list actors to do an "Apple like" advertisement on their home page for the unifi express. Why? If you cannot produce enough to sell to people, why advertise for it? Is it to draw people in, and then force them to buy something more expensive?

Somewhat recently I had to update to the 64 bit version of Raspbian OS to use Unifi Network 7.x. I had to use the tutorial linked from pimylifeup. Today the apt update switched to the 8.x branch of distribution and it said my architecture of armhf was not supported. To fix it, I just had to edit the file: /etc/apt/sources.list.d/100-ubnt-unifi.list from "arch=armhf" to "arch=arm64". If you were already running the latest 7.x then this should get you up and running. If you are upgrading from something older, visit the linked tutorial to get everything you need to be updated.

The automation in the screenshot would only prompt me to run the shortcut in iOS 16, but now has the option to run automatically in iOS 17.

FYI, this automation is great for my kids iPad. It seems to automatically connect when I leave the house, but then everything reconnects to WiFi when I get home. Loving it.

These words get upvotes. Do your thing!

The stock kickstand on my Yuba Spicy Curry has been feeling shorter for some time lately, and the bike has not been staying put on slight inclines. Recently the right plastic piece fell off and then I realized it had been ground down to the metal. So I glued it back on upside down, and ripped the left side off and did the same. I expect this will give me a few months to figure something more permanent out.

I was just at my local bike shop for my first service appointment. While there they informed me that the plastic end pieces are out of stock at Yuba...

Looking further into replacements, this is all I could really find on the web: https://www.amazon.com/Shepherd-Hardware-9115-1-Inch-Plastic/dp/B000I17D38/ and that thing is for chairs.

Truly, I would like to find something more substantial, and a little thicker to give me an extra 1/4 inch lift to keep the bike stable on uneven ground and steeper grades.

FYI, this kickstand is stock on the spicy curry, but it is either included or compatible with the sweet curry, mundo, boda, and kombi.

At the Taylor Swift concert, the parking lot enjoyed a healthy amount of support.

In an anonymous west side park, there is a relatively well kept place to relieve yourself.

And a closer look shows that Romance in the Honey Bucket is alive and well in the Queen City!

cross-posted from: https://lemmy.world/post/1080751

This is a great app that I have been using through the rapid beta. If you were too late to get a beta slot, you can now get it from the App Store. Be sure to give it a great review if you like it!

https://apps.apple.com/us/app/memmy-for-lemmy/id6450204299

This is a great app that I have been using through the rapid beta. If you were too late to get a beta slot, you can now get it from the App Store. Be sure to give it a great review if you like it!

https://apps.apple.com/us/app/memmy-for-lemmy/id6450204299

cross-posted from: https://centennialstate.social/post/24475

Wanted to check on the trail status before trying to use it today. This popped to the top of DDG. There is also an interesting chart for the level of the cherry creek. https://waterdata.usgs.gov/monitoring-location/06713500/#parameterCode=00065&period=P7D

Bottom line is that today the trail is only flooded in one place, but muddy in several.

My furr babies were so scared last night from all the noise. Anybody know what was up?