HumanPerson

joined 2 years ago
[–] HumanPerson 5 points 1 month ago (1 children)

Where linux?

[–] HumanPerson 6 points 1 month ago* (last edited 1 month ago)

The comments didn't seem bad to me. Some people were complaining about an HP laptop's power efficiency, but the framework's is fine. Also, the intel ones have noisier fans, but the amd is perfectly quiet in daily use. I have two real complaints with mine: while the power draw is low in use, it uses idle sleep, so it doesn't last that long asleep (longer than awake, so a few days to a week). You can of course power it off for longer term stuff, and boot times aren't bad so that really isn't a huge issue for me. The other one was a bit of a pain until I found the solution. All of the integrated amd GPUs from that gen have a problem on linux where they randomly get buggy and the whole ui drops to like 2 fps. It is resolved with a kernel parameter (sounds complicated but takes 5 min and a reboot. I will edit this with the steps when I get to my laptop). The frameworks generally improve over time. I wouldn't get a 16 yet, but my brother and I both got 13 amds several months ago and are very happy with them.

Edit: Nearly forgot, it came with an "AMD" (mediatek) wifi card. I replaced it with an ax210 as soon as I got it and would recommend you do the same. Amd requires laptop manufacturers to put the amd card in but it kinda sucks IMO.

[–] HumanPerson 8 points 1 month ago (1 children)

Not if you're the only one who knows and can create artificial scarcity.

[–] HumanPerson 1 points 1 month ago* (last edited 1 month ago) (1 children)

In fact, he's not getting a dime. YouTube doesn't pay until you have 1000 subs, so you are arguing that everyone should watch the video to support google.

Eidt: source https://www.thinkific.com/blog/when-do-you-start-getting-paid-on-youtube/

[–] HumanPerson 2 points 2 months ago

Considering my boot drive just died, backups. Also wanna get a fractal node 804 and cram tons of HDDs in it. Probably a new build with ecc as well. Perhaps transitioning current server to backup server. Also my directory structure for media is a jumbled mess of incomprehensible nonsense. I should fix that. Also I lost all my torrents that I was uploading but still have the media but can't keep seeding after the drive failure.

[–] HumanPerson 2 points 2 months ago

Yes, although if you take it from your own streaming or something there may be watermarks to identify you. If you just repost from clearweb torrents you'll be fine.

[–] HumanPerson 4 points 2 months ago
[–] HumanPerson 7 points 2 months ago (5 children)

Yeah, that's a kde thing, so I doubt it would be very different than neon.

[–] HumanPerson 23 points 2 months ago* (last edited 2 months ago) (8 children)

I'm quite happy with Fedora. It has kde support, many apps (especially with rpmfusion), and is quite stable because it is still a 6 month ish major release schedule. Wobbly windows, kde connect, and krunnuer will definitely work. Good customization is subjective, and honestly I consider c/unixporn to be weird but cool wizardry, but I'm happy with it. One thing to consider is if you have a newer amd CPU with an iGPU being used it will get slow and crash every now and then (few months). It's a bug in the linux kernel starting around 6.10.

[–] HumanPerson 6 points 2 months ago
[–] HumanPerson 2 points 2 months ago (4 children)

The Ender 3 Pro looks good, but I am a bit worried about the DIY aspect of it. I normally like DIY stuff, but since I am new to 3d printing, I want to isolate the number of things I have to learn. Is it too hard to set up, and does everything you need (apart from filament) come in the box or will I need to get other things?

[–] HumanPerson 15 points 2 months ago* (last edited 2 months ago)

I typically just copy the title into google with quotes around it. Can also add filetype:pdf.

Edit: Didn't see title, leaving up anyway.

38
submitted 9 months ago* (last edited 9 months ago) by HumanPerson to c/[email protected]
 

Currently, I use Debian on my server. I have an Intel Arc GPU that I use for transcoding, however hardware encoding doesn't work. I am able to get a slight performance benefit from decoding, but encoding would be much better. I have an A750 in my desktop (not server), and was able to get hardware acceleration working, but only with openSUSE Tumbleweed with the stable kernel (6.9.4). While I would love to have encoding, (I am limited on upload speed and av1 encoding isn't practical on the CPU for multiple streams), I doubt it would be stable using a rolling distro and non-standard kernel. Has anyone else tried anything like this? Are there any arc + jellyfin users out there who know any way to make this work, or any openSUSE self-hosters could vouch for its stability? I am willing to try almost any distro (except ubuntu) to make this work.

Edit: fixed. There was some firmware I needed to work on debian. I will link and such in a bit when I have time.

30
submitted 9 months ago* (last edited 9 months ago) by HumanPerson to c/[email protected]
 

Hello. These questions are self-hosting related, but I feel they do partially belong here as they are also about fedora linux in general. I have a server which is currently running Debian. It has an arc GPU, and no matter what I do, video encoding refuses to work. I was thinking I might move it to Fedora, but have some questions first.

  1. How are Fedora's updates? I believe they are about once a year, so how is it to switch between versions? I can deal with annual maintenance, but don't want weird issues causing downtime.
  2. Also about updates, how should I do auto updates on fedora?
  3. I am currently on apparmor. I know seLinux has more features, but I have also heard that it can be annoying to deal with.
  4. I mentioned the arc GPU. Has anyone managed to get video encoding working on it on fedora? If so how?

Edit: also, how is it to move a raid over. It is mdadm raid 5 with ext4. It is VERY important that nothing happens to the data, unfortunately I have not yet implemented a backup, although I do intend to soon.

24
submitted 9 months ago* (last edited 9 months ago) by HumanPerson to c/[email protected]
 

Basically title. I have a 7600(x)(t) 8G. I want drivers with opencl for hashcat. I know the proprietary ones work, but they are a ludicrously massive PITA. I am willing to use almost any distro to make this work (not Ubuntu, and not one of those random newer ones). I really hope I don't have to use the proprietary drivers.

Edit: found a good enough solution. I listed the card on ebay and will replace it with an intel arc soon.

 

The video is an old one about Katrina. I need it for homework. I have tried accessing it from CNN's website but CNN in their infinite wisdom put DRM on the video that is publicly available, and I assume that is why it doesn't work on mull, librewolf, or chromium (all show same error about neon request failed). I looked on the generic torrent sites to no avail. Any response would help, the questions are very specific to the video and it is due soon.

 

I recently found this on Reddit while looking into why jellyfin is effected so much by latency. I found that this worked and thought I would share it because it is generally applicable, takes five minutes to setup, and helps a lot with bandwidth on higher latency connections. I admit I am not sure of the technical stuff behind this, so if anyone would like to chime in that would be much appreciated.

91
How should I do backups? (self.selfhosted)
submitted 11 months ago* (last edited 11 months ago) by HumanPerson to c/[email protected]
 

I have a server running Debian with 24 TB of storage. I would ideally like to back up all of it, though much of it is torrents, so only the ones with low seeders really need backed up. I know about the 321 rule but it sounds like it would be expensive. What do you do for backups? Also if anyone uses tape drives for backups I am kinda curious about that potentially for offsite backups in a safe deposit box or something.

TLDR: title.

Edit: You have mentioned borg and rsync, and while borg looks good, I want to go with rsync as it seems to be more actively maintained. I would like to also have my backups encrypted, but rsync doesn't seem to have that built in. Does anyone know what to do for encrypted backups?

90
Self hosted LLM (self.selfhosted)
 

Hello internet users. I have tried gpt4all and like it, but it is very slow on my laptop. I was wondering if anyone here knows of any solutions I could run on my server (debian 12, amd cpu, intel a380 gpu) through a web interface. Has anyone found any good way to do this?

 

I have SSHFS on my server and would like to have it automatically mounted and store all of the documents, desktop, downloads, etc. on a couple computers. I am able to get it to all work except for mounting on startup. The server is Debian 12 and both clients are Tumbleweed. Nothing in fstab seems to work. When I add x-systemd.automount, well, at best programs that try to use it crash and at worst I have to go through recovery mode to get the system to boot properly. I am using ed25519 keys with no passwords for authentication. Does anyone know how I could get this to work?

74
submitted 1 year ago* (last edited 1 year ago) by HumanPerson to c/[email protected]
 

Hello internet users. Someone in my family is looking to buy a car and wanted some recommendations for a private one. They are looking to buy new, and need Android Auto and CarPlay. I know all new cars suck for privacy by default, but I was hoping someone here could offer some insight as to which cars can be made better and what cars offer the best experience with minimal compromises on privacy and no subscription bs. I also have a Home Assistant instance that they can access remotely if there are any cars that can work well with that.

Edit: Android auto and CarPlay aren't as important as I thought.

10
submitted 1 year ago* (last edited 1 year ago) by HumanPerson to c/[email protected]
 

I know this sounds like more of a "how do I use computes" question than a legitimate selfhosting question, but I think it fits here. My LibreX instance is hosted and appears to be fully functional, but when I try to add it to my browser it reports its url as 127.0.0.1:8080 instead of the actual address. I tried to get it to work with chromium as a troubleshooting step, and while it did let me change the address, it had some other stuff after the search.php?q= that made it return a 404. Does anyone know how to fix this?

edit: run with -e OPEN_SEARCH_HOST="https://yourdomain.tld" to get it to report the correct thing. You also have to remove and add it back in your search engine.

2
submitted 1 year ago* (last edited 1 year ago) by HumanPerson to c/[email protected]
 

Hi. I am looking to buy some Bluetooth earbuds and want to know what you all like. I am sure I will miss some things, but there are some features that I care about:

  1. Noise control features. I would prefer ANC and an ambient sound mode, though ambient sound is more important to me.
  2. Apps. I don't want to use an app for them. If there is an optional app that is fine as long as they are good without it.
  3. Durability. I will drop them, possibly in water, I want something solid.
  4. Price. I am looking for something under $120, but could go up to 150 if they are really good.

I don't know if this is the right place for this, apologies if it isn't.

Edit: for anyone wondering / also looking for earbuds, I gave up looking for good Bluetooth and got Moondrop Jiu. They are wired but sound great (IMO. It's subjective obviously.)

 

Hello. I just got a google pixel with grapheneos, and would like a way to use Apple's find-my or something similar with family members who still use Apple. I would like something open source that can either proxy my location to Find My or serve as an alternative. I know these apps and services are inherently not private but I do need it so please don't be the guy to say "just don't use it," I would if it were an option. Thanks.

view more: ‹ prev next ›