B0rax

There is no shortage on frontend alternatives for PC… but somehow I have yet to find anything worth mentioning for iOS

Ha! Zugvögel.

Hast du da ne vernünftige Quelle dass der andere Zucker wirklich „besser“ ist als Raffinade Zucker?

Extremismus? Sie haben Dinge behauptet die sie nicht erfüllen. Das hat nichts mit Extremismus zu tun wenn man ihnen das ankreidet.

Becel Gold kann man echt empfehlen.

Thanks!

Was für Probleme gab es denn? Das Alter ist ja noch <128. oder waren es einfach so viele Einträge?

I have done something similar by purposefully adding patterns on the bottom of a 3D model.

Yes, this graph is not clearly presented. It is not really beautiful.

The data it presents is kind of good, but the main message should be here to spread awareness and get more people to participate in that petition.

So als Anekdote: ich habe grade erst letzte Woche bei einem herrenausstatter einen Anzug in fairtrade und Bio erstanden.

Ok, let's look into it. (you can also send me your printer.cfg if you want) The Mini e3 v3 has the following switchable outputs:

• HB - PC9
• E0 - PC8
• FAN0 - PC6
• FAN1 - PC7
• FAN2 - PB15

Keep in mind that they all switch ground only. 24V is always there.

You can use all of them for whatever you want, Klipper is very flexible here. HB is your heated bed, no questions here. E0 should be connected to your Hotted board HE0. I don't know which of the fans on your board does what, you may need to connect them all and see which one does what (I guess your hotend does not have 3 fans). in the end you want [hotend_fan] to be the one calling the hotend (not the part!). the [fan] will be controlled by the slicer (overhangs, bridges and so on).

DCIN on your board should ideally be connected directly to the PSU, you do not want it to be switched.

don't worry, we will get you back printing.

Glad to be of help!

The FAN1 in this case can not be controlled by software. It will always be on as soon as the printer is powered.