this post was submitted on 20 Nov 2023

2 points (100.0% liked)

Home Automation

79 readers

2 users here now

Home automation is the residential extension of building automation.

It is automation of the home, housework or household activity.

Home automation may include centralized control of lighting, HVAC (heating, ventilation and air conditioning), appliances, security locks of gates and doors and other systems, to provide improved convenience, comfort, energy efficiency and security.

Warning: Working with electricity can result in injury, property damage, or even death if it is not done properly. Please keep this in mind while assisting others. If you are not sure about what you are doing, hire a licensed professional.

Rules

No abusive behaviour. This is a forum for friendly discussion; personal attacks will not be tolerated and you will be banned without warning.
Referral/affiliate links are NOT ALLOWED!
NO POLITICS! There are plenty of other communities to discuss them; this is not one.
When posting project details must be included. Posting a video or image without detail will result in a removed post and may result in a ban.
Crowdfunding links are not allowed.
Reposts, low-effort content and karma farming may be removed at the discretion of the mods. Posters may be banned without warning.

founded 1 year ago

MODERATORS

[email protected]

dumb lamp smart (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

13 comments fedilink hide all child comments

I have looked and looked and found many half-solutions, but what I would love is some kind of magic hardware that can be wired into a standard bulb lamp with socket switch/chain to make it smart without the built-in switch breaking the smartness.

By breaking smartness I mean shutting off power to the smart device or shutting off power to the bulb so it can't be remotely turned on. The latter is how most smart plugs work. The former is how most smart bulbs work.

I want something like a wire-in bulb socket like the one pictured but with the switch wired to a zigbee relay like a sonoff zbmini L2 so it registers simply as a toggle.

There are some small modules similar to this like the aforementioned sonoff zbmini l2 and those zigbee/wifi socket adapters so maybe I could hack something together.

or do I just gotta do a Kickstarter so everyone can enjoy this product?

top 13 comments

sorted by: hot top controversial new old

[–] [email protected] 2 points 11 months ago

Why won't smart bulbs and receivers work? Such as Philips hue

[–] [email protected] 1 points 11 months ago

I feel like this needs a Shelly dimmer module and some modification to the original chain or switch mechanism. I have never used it so not 100% on how it works, but with two switch inputs maybe the step settings on the dumb lamp could be wired to 3 (both off, sw1 on, or sw2 on) or 4 (both off, both on, sw1 or sw2) distinct states and then program that to control set brightness levels.

[–] [email protected] 1 points 11 months ago

I have spent some shower brain time thinking about this very idea. It may be useful to look at 3 way switch bulb sockets to see what else can be squeezed into the standard form factor. I agree with the goal of creating a "dumb human compatible smart lamp".

[–] [email protected] 1 points 11 months ago (1 children)

without the built in switch breaking the smartness

You can’t have a dumb switch magically become smart just because you added another piece. You either need a lamp that is for a switched outlet, or modify an existing switch to no break the circuit

[–] [email protected] 1 points 11 months ago

which is what I'll likely try to hack together. the question is: can a standard bulb socket with switch be made into two separate things?

[–] [email protected] 1 points 11 months ago

Does your smart scenario have schedules and motion sensors?

You can use scheduling to clean up after your less attentive humans. Also, any LED replacement will mitigate bills to a degree.

You could wire in some kind of motion sensor or drop one near by to cause magic for the average humans in the place.

Since you're a little stuck, keep in mind (my "professional" HVAC lessons learned advice here) that any elegant solution probably was overthought to hell and back or found by luck or even lucky trial and error.

[–] [email protected] 1 points 11 months ago (1 children)

I have actually built something like this.

I modeled a base (and 3D printed in ASA) that holds a Fibaro FGD-212 dimmer, and have that exact bulb fitting (but black) screwed into the base.

There's a button on the front that is connected to S1 of the dimmer to be able to turn the light on from the base.

I did this YEARS ago so I would probably do it differently now, but maybe it gives you some inspiration.

https://www.imgdumper.nl/uploads9/655b46e5d90c1/655b46e5d4639-photo1700480702.jpeg

https://www.imgdumper.nl/uploads9/655b47068c316/655b47068711e-photo1700480702%281%29.jpeg

https://www.imgdumper.nl/uploads9/655b471175a8a/655b471170461-photo1700480702%282%29.jpeg

https://www.imgdumper.nl/uploads9/655b471c6bed6/655b471c67f73-photo1700480702%283%29.jpeg

[–] [email protected] 1 points 11 months ago (1 children)

I smell what you're cooking. did the switch on the socket do anything or was it just for show?

[–] [email protected] 1 points 11 months ago

It could still be used to turn the light off and on, but it's an actual switch cutting power to the light and isn't operated by something smart

[–] [email protected] 1 points 11 months ago

I would use a dimmable smart bulb and leave the lamp on high and dim the bulb via Alexa/Siri/Google Home. If dimming isn’t essential, a smart plug would serve the same purpose.

[–] [email protected] 1 points 11 months ago

Im following! I have just replaced my wall switches to smart dimmers where both the wall switches work and the app too. I have yet to find a solution for cable switches for table and floor lights. Seems impossible to find something thats hue compatible.

I also don't want to be reliant on my ZigBee network that might fail due to the bridge failing. It's not like a lot of people say solved by explaining it to humans.

[–] [email protected] 1 points 11 months ago

I'm guessing using smart lights like Hue isn't a solution you are looking for?

[–] [email protected] 1 points 11 months ago

My dumb humans may tolerate something like this if I wire the socket to "always on". I can just stick it to the side of the lamp/socket where it's intuitive to press instead of the default lamp's control.

https://preview.redd.it/r5r17pvp3q1c1.jpeg?width=1500&format=pjpg&auto=webp&s=99a191c1af2bd6b5e27a4a974c344f0ba30a19d3