I make the switches smart, not the bulbs.. Retains normal functionality, is cheaper and more reliable.
this post was submitted on 06 Nov 2023
19 points (91.3% liked)
homeassistant
12139 readers
4 users here now
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
founded 2 years ago
MODERATORS
Cheaper? :O This is the super-deluxe splurge option compared to some cheap IKEA ZigBee bulbs
Got any recommendations? ZigBee, Zwave, or something else?
One nice thing about having the bulbs smart is changing the color temperature. Is there any way of doing that from the wall-switch? It's kinda what's been stopping me from upgrading from smart bulbs to smart switches
Cheaper? :O This is the super-deluxe splurge option compared to some cheap IKEA ZigBee bulbs
Depends how many bulbs are on each switch, in my home it is typically 4 to 1 at a minimum and the switch will outlive the bulbs. Color is about the only reason to use a smart bulb.
This is my preferred solution. I like the option that I can use the switch as normal and still get benefits of automations. Switches should outlast any bulb on the market and with other family members around there's no way to guarantee that they stay in place. Plus with that I can change the lamp itself to self-contained LED without bulb or something else and it'll still be 'smart'.
But if I absolutely had to go that route I'd get white tape (assuming the faceplate is white) and use that to hold rockers in place. It's still easy to switch off if needed but that would give a pretty strong indication that it shouldn't be operated normally. Preventing access to a switch or jamming them with something doesn't seem like an safe option and it may be against the code depending on where you live.
Downside of switches though is that they often require a neutral wire. If all you have is "Hot", "Not" and ground, your kinda dead in the water. Rewiring an old house can get pricey.
There are a variety of Zigbee switches and relay dukes that support “no neutral” wiring. SONOFF and Aqara both make them, there are even a few generic/Tuya ones I’ve seen.
They often don’t function as Zigbee routers, only end devices though despite being mains powered.
I also favour smart switches instead of smart bulbs. It avoids the problems of accidentally turning off the smart bulb with the dumb switch, and provides a fallback control method if part of the smart home stack is not working.
The main downside to this method is not being able to change the light colour and temperature of the bulbs. I have seen there are some smart switches and bulbs that can work combined but I haven’t tried them myself.
I have 1 light in my house that can't be put on a smart switch because of wiring issues. For it I have printed a couple of locks (the light has 2 switches) similar to these.
I know you said you don't have a printer, but check etsy. Every good model ends up being sold by somebody on etsy. Or you can check to see if your local library offers use of 3d printers, mine has a whole maker space in it now.
I never knew about the library thing! I think I'm going with these instead, but knowing my library has a 3d printer (it does!) will be far more powerful down the road.
I went with momentary push-button switches connected to zigbee dimmers behind the wallplates. Cost more but it's much more sensible, particularly for double switch situations where you just parallel up the switches.
I have Decora style dumb switches on some fixtures.with smart bulbs, and just use white vinyl electrical tape to tape the edge of the rocker down. Keeps the family from turning stuff off by accident, for the most part.
Low tech, but it works.
I 3D print a "missile switch cover" type of . It makes it possible to flip the switch easy enough, but prevents turning it off by muscle memory.
Switch guards to keep people from accidentally using them but that allow you to use them if you need.
You can install switch blockers on the physical switches if you really want to go the smart bulb route.
Magnetic Light Switch Guards, ILIVABLE Light Switch and Outlet Cover for Flat Modern Switches, Not Child Proof (Clear, 2 Pack) https://a.co/d/aN57Zqe
CLYMENE Light Switch Cover Guard, Child Proof Wall Switch Cover Keeps Your Lights or Switches from Getting Accidentally Turned ON or Off, Toggle Style (White, 2 Pack) https://a.co/d/1WjLl5f
Personally I prefer using smart switches, or smart relay modules in between the switch and bulb. However that’s maybe not best for you if you are already invested in smart bulbs.
The “neatest” options would be to fit a switch cover over the switch, or remove the switch and replace with a blanking plate. A smart button can be fitted onto the cover or plate to provide the functionality of a switch, there are devices with multiple buttons and even rotary knobs.
Depending on the style of light switch used in your country there may be commercially made switch covers available if you can’t 3D print them. There are also several 3D printing services online that can be fairly affordable, I’ve had decent service from Treatstock.
This is why I never use smart bulbs for anything switched.
I plan to put guards on.
However, I'm first treating it as a service problem (if someone in the house is using the physical switch, I haven't made it easy enough to use the controls, and more hardware may be required)
All you people spending money on switch covers. I rent this place so I'm not messing with the switches at all so I've just put a piece of white tape on the switches. Simple.
99 percent of the time we don't have visitors. So the tape is there to stop my kids switching. We've had a smart home since 2021 so they've got used to it and don't use them anymore.
Guests sometimes still do it but it's rare and when it happens I just switch the light back on.
The only wifi bulbs I have are in lights that don't need manual interaction, eg. floor lamps, bedside lamps, desk lamps, etc. Fixed lights get a Shelly relay behind the switch, so I can get the best of both worlds.
You wire them up to a switch sensor.
You can get cheap plastic covers that attach to the switch using the same screws that hold the plate around the switch.
They are open on one side so that you can easily get to the switch when desired.
We do smart bulbs with the covers on any switches, and the switches of course left on. Then it’s easy to do whatever brightness/colors desired with automation routines.
If you don't have a neutral wire, use a wire nut to connect the power. Then I use this battery powered zwave switch to control the lights https://www.amazon.com/gp/aw/d/B09BQKD5FQ?psc=1
I use these:
But something like either of these would be easy to print:
Switch covers are the way I went, then you can still get to the switch if you should need to
leave the switches in the wall but bridge the cable so it stays on irrespective of the switch position. or join the cables behind it with some terminal block
And then you can't easily cut power from the fixture if you need to replace the bulb or change the whole lamp altogether. I wouldn't recommend doing this, especially if you don't have a socket on the ceiling to remove the fixture.
I’ll take “what are circuit breakers for?” for $250 Alex
Most of my switches are smart, bulbs are dumb. Any smart bulbs are on non switched lights and are controlled by automations.
That said, I do have a smart RGBW bulb in our master bathroom fan that's also on a smart switch. The switch doesn't actually control the power, rather it works more like a button (via a setting configuration on the switch). That allows me to control normal lighting with the on/off toggle, and I can also factor in other elements, like time of the day. For example, turn on the light at 6:00 AM and the bulb is set to 100% brightness and a cool white color temperature. At 10:00 PM, a warm white at 40% brightness. After 11:00 PM it sets to red and 10% brightness for overnight restroom needs. Definitely not the cheapest route, it definitely the most control. Might be worth considering for your highest traffic areas.
I’m using Philips hue wall switch modules. They’re not cheap, but they allow me to use the switch as a normal switch and even program them to turn on different scenes depending on how I use them. It’s so much nicer to have than the taped down light switch I had at first.