SpaceX

New comment from /u/santacfan on Reddit:

Starbase live-

11:56pm- 2nd manifold is lifted off it’s stand (Who needs sleep anyways)

12:12am- Manifold is going up after some weight was added to balance the load

12:14:40am- Starts to swing over

12:18am- Lowering. This should go to the left of the plate installed earlier

12:23am- Trying to get it aligned

12:25am- Starting to bring it in closer to the OLM

12:31am- Lowered a bit more. (Looks like they’re at the 10ft mark where they paused for quite a while earlier. So I’m off to bed)

12:45am- Lowered into place.

1:21am- Raised again

1:50am- B10 turns into Massey’s

2:01am- Manifold is lowered again

2:20am- Manifold go up, Basket go down

2:25am- Manifold goes down

2:36am- Basket goes up

2:59am- Basket goes down

3:35am- Small crane swings what may have been the 3rd manifold into place under the OLM

3:51am- Grover moves a piece of small diameter pipe over to the left side of the OLM where the excavators are working

5:30am- LR11000 is disconnected from the manifold section

8:10am- Day shift off to a slow start

9:25am- White pipe is lifted by a small crane over by the berm. RGV’s pictures show that they might be running a new water line from the current vertical tank over to the OLM.

9:32am- LR11000 lifts the counterweight that was used to keep the last manifold level during the lift

11:04am- Basket goes up

11:21am- Retaining wall goes up where they’ve been excavating

11:24am- Basket goes down

11:36am- 2 workers carry a plastic pipe over to the pit being dug by the long reach excavator (if it’s metal, enter those guys in a body building competition)

11:55am- 2 dump truck loads of gravel dumped on the other side of the excavator

12:00pm- Nic is leaving NSF

12:53pm- Basket goes up

1:06pm- Basket goes down

1:24pm- Grover lifts a couple pieces of metal off of the top of the OLM

1:40pm- LR11000 moves another counterweight away from the OLM

2:11pm- LR11000 lifts another counterweight

2:17pm- Small crane lifts a piece of metal out of the excavation pit

2:53pm- In todays adventure of what’s stuck at Starbase. We have a small bulldozer hanging off the side of a low boy trailer.

2:53:54- Random kid says hi

2:58pm- The excavator wins again. Bulldozer is on the trailer.

3:34pm- Grover moves what looks like a long straight piece of rebar over to the cryo pit area

3:49pm- Grover lifts a triangular piece of metal to the top of the OLM.

4:13pm- Grover lifts another triangular piece of metal to the top of the OLM.

4:30pm- Grover lifts more rebar over for the cryo pit lid

4:50pm- Basket goes up (to the door on the side of the OLM)

5:02pm- Rocket cows hack the stream

5:03pm- Basket goes down

5:37pm- Basket goes up

5:44pm- Basket goes down

6:32pm- LR11000 picks up a deluge pipe

6:51pm- Grover swings out of the way

6:57pm- LR11000 Starts swinging deluge pipe over. Straight pipe with a curve on the end closest to the OLM.

6:59pm- Starts lowering pipe to the back left side OLM

7:47pm- Small crane lifts a short piece of pipe next to the bigger piece the LR11000 lifted over

7:51pm- Short piece swung back away

9:00pm- Looks like some work on the lid for the cryo pipe vault. Some people going in and out of the ring around the OLM. They’re hiding what we really want to see behind the tarps though.

9:15pm- LR11000 moves to pick up Y pipe

9:41pm- Lifting straps connected to the crane

9:56pm- Y pipe lifted

9:58pm- Swung around the OLM

10:06pm- Lowered to just above the OLM

10:08pm- Guide rope got stuck on smaller crane. Had to go back up.

10:09pm- Going back down

10:12pm- Sat on the ground right outside the pit.

10:14pm- Lifted Up slightly and rotated

10:15pm- Lowered into the pit

10:25pm- For those wanting to keep track, In Ryan’s renders, we’ve seen the bottom pipe that goes to the middle manifold and the Y section that goes over it lifted in so far. There should be 2 short pieces next to connect the Y to the other 2 manifolds.

(This gets synced)

If anyone is interested in the rebar, the guess is that it’s #11 or #14 gauge based on pictures that we’ve seen.

Which leaves me wondering if there’s a tie gun out there large enough or if these guys have to do it all by hand. (My quick search only shows guns capable of #8 and smaller)

Renders by Ryan Hansen of the water deluge system, with the final result being:

New comment from /u/santacfan on Reddit:

Starbase Live-

5:32pm- Plate starts to be lifted off of the moving jig

5:34pm- SPMT starts rolling out from under OLM

5:36:30m- Plate starts to be lowered

5:40pm- Plate starts to be tilted to horizontal

5:48pm- It’s a little close on one corner. Pulling on those guide ropes a little harder

5:54pm- People are walking on the plate

5:56- Looks like they might be measuring the gaps between the plate and legs. Still tension on the lifting straps

5:59pm- SPMT with moving rig is rolling back to the build site. (So strike that as a possibility for tomorrow’s closure)

6:00pm- Slack on the lifting cables. Officially down

7:56pm- Plate lifted back up a couple of feet

8:02pm- Plate lowered

8:05pm- Plate raised again. Stands placed around edges.

8:39pm- Plate raising even higher

9:08pm- Forklift bringing in even higher stands

(This gets synced)

Should we now be creating thread #47?

Reddit thread is back up, thanks threelon

S25 lost about 11 tiles during the first static fire.

Cryo loading of S25 well underway at 16:18 CDT

"SpaceX launched the most powerful rocket ever built. Its impact is still felt in this Texas community", a CNN article dated Friday, 7 July 2023.

Musk has repeatedly said he’d like to try to launch Starship again as soon as this summer, but the FAA said in a statement to CNN that SpaceX has yet to take public safety actions or submit a mishap report with corrective actions for FAA review and approval.

The big plate is on the transport stand and moving under the OLM as we speak.

That was quick! I thought the concrete would have to set a bit longer before taking such a load but apparently not.

Thread 47

Detanking at 15:43 CDT.

Marcus House @MarcusHouse tweet: "We have Elons Starship talk updated now to tomorrow." (Friday, 23 June 2023)

Do you know where one can find a link to those pictogragh images to build/test status for starship/booster? I found those as a clean hud of shipset build stats easily digested. Not sure who created them though I always enjoyed seeing them when they popped up on reddit

Additional views from yesterday’s Ship 25 static fire https://twitter.com/SpaceX/status/1673808523497721856?s=19

New comment from /u/santacfan on Reddit:

Starbase Live-

7:11am- Grover starts to wake up

7:13am- Dance floor drives under OLM

7:22am- Dance floor wings unfolded

7:23am- Grover delivers a cryo pipe over to the doghouse area

7:24am- Dance floor raised into position

7:38am- LR11000 looks like it’s hooked to a manifold

8:23am- Grover delivers another cryo pipe. This time partly up the leg where the cryo pipes run. Looks like they are replacing them through the access holes

9:15am- Lots of concrete being broke up and hauled away by a front end loader

9:39am- The extended reach excavator that had been working in the area where the deluge pipes will go, left.

9:55am- Grover lifts the yellow basket normally used to take down scaffolding to the top of the OLM.

10:33am- Yellow basket brought down

12:00pm- All is quiet on the southern front. Pretty slow day after the last couple.

1:01pm- Grover lifts the yellow basket back up to the OLM

1:31pm- Basket comes down

1:43pm- Basket goes back up

1:46pm- Basket comes back down

1:56pm- Basket goes up

2:02pm- Basket go down

2:07pm- Basket go up

2:15pm- Basket go down

2:30pm- First piece of level 4 for the new mega bay is lifted

2:47pm- Basket go up

2:55pm- Basket go down

3:09pm- Grover lifts a load of something metal up to the top of the OLM

3:25pm- Grover lifts a 2nd load to the top of the OLM

3:42pm- Grover lifts a 3rd load to the top of the OLM

4:07pm- Long reach excavator returns

5:50pm- The LR11000 took tension on the lifting straps that have been connected to the manifold piece all day.

6:24pm- Manifold is lifted

6:25pm- Crane starts swinging towards the OLM

6:29pm- Goes flying over the OLM

6:31pm- Starts lowering

6:34pm- Starts swinging towards bottom of OLM

6:48pm- When looking head on from SBL, it looks like it’s going to the left side of the BQD. So this is the middle manifold. Which based on Ryan’s renders makes sense because the pipe for the far right manifold will run over the pipe for this one

7:06pm- Holding about 10ft above the pad

7:10pm- Starting to tilt the backside down into place

7:30pm- Level it back out and holding around 10ft

7:50pm- Lowered down some more but behind stuff now. Still tension on the straps

7:51pm- B10 starts rolling from the rocket garden

8:16pm- Manifold is raised back up

8:18pm- B10 staged at the end of Remidos

8:21pm- Manifold lowered back down and swung in closer to the pad

8:25pm- Grinding by the doghouse area

8:50pm- Lifting straps on the manifold went slack for a second before they went taunt again. So the plate may be close to/all the way down but the LR11000 still has the weight. If only those tarps weren’t there.

9:00pm- Speaking of the tarps, that area of the plate is where one section of the plugs were. Ryan theorized that they’ll be adding extensions on to these areas.. So that might be what’s happening on the other side. We can definitely see some welding going on

9:20pm- 2 small excavators are working on digging a trench for a small pipe

10:27pm- B10 is rolling.

10:33pm- Turns on to hwy 4

10:40pm- They see me rollin, down highway 4, I know they’re all jealous, because I’m off to get all white and frosty. I’m going to get all white and frosty, I’m going to get all white and frosty, wait until you see me all white and frosty, going to look really cold all white and frosty. (Weird Al I am not but Hey it’s been a long day, I’ve got to entertain myself somehow)

11:10pm- 128 wheels tonight. So they added 1 section to each line of SPMT’s after delivering the manifolds.

11:19pm- Time for a break. (Someone read it my version of White and Nerdy and now it refuses to go any further until I delete it)

11:22pm- While we were watching the big shiny thing drive down the road, the LR11000 was unhooked from the manifold section. (It happened at 23:19 on Rover 2)

11:32pm- Straps being hooked to the next manifold piece

11:39pm- B10 is rolling again

11:40pm- Someone didn’t make sure their swing path was clear. Grover swings into one of the cages holding the high pressure gas bottles nearly knocking 2 cages over.

11:47pm- Forklift arrives to move the cages

11:48pm- And just what was Grover doing while this was happening, that’s right,

Basket go down

(This gets synced)

The Deluge plates are ready to move to the OLM. Here’s a really nice shot: https://twitter.com/NASASpaceflight/status/1676965314989539328?s=20

#To repeat, new pinned thread:

Thread 47

As @clothes on lemmy.world pointed out: for some reason, via lemmy.world, this 46B thread is still pinned and there's no sign of 47.

Hello there!