Fuck this video. Dude claims it’s killing you and offers zero reason as to why or how. Pure clickbait bullshit here folks
Also leads with "It's not clickbait", then it is clickbait. Really the peak of modern Youtube scum.
To be fair, this is kind of the environment YouTube have cultivated over the years, intentionally or otherwise
To be fair, YouTube cultivated this environment because their users respond to it. If users stopped clicking on clearly-clickbait videos, YT would stop pushing them, and creators would stop making them.
Little quite I heard from, ironically, a YouTuber:
“Wishing upon a star that people be better than they are is a terrible plan every time”
Let's say the chemicals aren't healthy. Disclaimer: RTFM (MSDS and technical datasheet) and consult with professionals.
There are a few issues here at play. One major issue is that repeated exposure has a risk of sensibilization. Once this happens there is no way back. Your life will change.
The consumer industry has already moved. I remember explaining to Anycubic sales what an MSDS is and why I need it (if you need a good argument in such conversations: REACH). These days you can download it on their website.
To this day the packaging might not be CLP conform. At least their marketing got better: Water washable has now a section about waste treatment but plant-based resin is still advertised as "low odor and safe to use" or "truly environmentally friendly". Worst of all they still suggest that the odors are safe to breathe as everything is soybean-based: The truth is they aren't and neither is it soybeans. What once was soybeans is heavily modified.
Sadly this is not just an Anycubic issue.
Btw. If you use Anycubic though resin: According to their MSDS they switched the product and kept the name the same (approx. 2 years ago).
I'd love to have understood any of your funny words magic man.. eli5?
Don't breathe it; don't get it on your skin and wear safety glases. Don't flush it down the toilet.
Gloves: Those single-use gloves are spill protection and nothing more. If you can avoid touching resin avoid it and swap them immediately if they contact resin. Keep in mind that approx. 1-2 gloves per box (100 pcs.) can have holes/defects.
For waste treatment: Follow local guidance. As a rough rule of thumb: expose the resin to the sun (fully cure it), let the IPA evaporate and dispose it as a solid.
Flammable liquid storage: Keep the amount stored (inside) as small as possible. If the room is an escape route move your IPA washing station to a different room. Obviously, have a smoke detector in every room of your household, test them every few months and replace after 10 years.
How to check for contamination? Most printer resins are UV-reactive. Get a handheld UV-lamp/black light (those to check bank notes) and if anything lights up in green (fingerprints or spots) you have contaminated it with resin at some point (unless the object/material is also UV-reactive). Especially at the beginning, such a device is useful for learning good work practices (e.g. resin on the glove and touching the curing station or spills on the silicone matt around the washing station).
Any chemical is as safe as you make it: If you are careless it's dangerous. You do your homework and it's suddenly safe to use.
If you don't feel safe or scared by a chemical don't work with it. In this case ask around if somebody already does resin printing and get familiar with it before doing it on your own.
Honestly what worries me the most are the fumes
Health and Safety says:
Don't breathe in the fumes.
What is "sensibilization" and why is it not a good thing?
They mean sensitization. It's where you react more strongly to exposure the more you're exposed. It's a problem for a couple of reasons. The scary one is some people move along the reaction continuum from "mildly annoying" to "oh shit call an ambulance" pretty fast. It's not common but it happens. I actually have a condition that predisposes me to that so I always carry an epi-pen. Good times.
The more mundane one is, even with controls to remove fumes and PPE to avoid them, it's not uncommon to still be exposed to a small degree, especially in a hobbyist setting. Let's imagine you're lax on avoiding exposure and become sensitized due to prolonged and/or heavy exposure, so you set up proper controls to try to avoid it. Now the small amount of remaining exposure which may have never been a problem with proper controls may actually become a problem. Now you can't work with that material at all without having some sort of reaction.
Did you actually watch the video?
He literally presents a list of reasons around 5:12. Then he goes on to describe how formaldehyde already affects him.
Resin priting can be a lot of fun, but he's correct: that shit is toxic. It needs to be respected, and he's also correct in pointing out the carbon filter on many printers is basically a placebo for the consumer.
Still don't believe him? Fine. Go checkout the small book that is the set of warnings with this stuff from a resin producer: https://entropyresins.com/safety/epoxy-safety-tips/
He mentions VOCs within the resin, just because you can't wrap your head around why inhaling "volatile organic compounds" can be bad for you, does not mean it's wrong. Take proper precautions to ventilate the area while printing resin, please.
You know volatile just means it readily evaporates, right?
Alcohol is a volatile organic compound.
Nothing about the term 'volatile organic compound' means dangerous. You need more information.
Even when you cook food there are volatile organic compounds all around you and nobody would say they're dangerous.
Oh, we're supposed to read the manuals before handling chemicals now?!
I'll check the manuals after mixing up this sweet bleach and ammonia cleaning spray.
Mhhh, clorine gas
It really helps freshen up the sauna if you got a bad smoke draft. Just removes the smoke smell immediately. If you pour the mix on the hot furnace you are golden
volatile organic compounds
Perfume and air fresheners are VOCs, you need to know specifically what ones.
You clearly have no idea what that even means.
When you cook food there are voletile organic componds. Almost everything you smell are voletile organic compounds. Parfums are voletile organic compounds. Your air is full of voletile organic compounds.
It doesn't say shit about how bad something is for you.
Explain what you mean by use heat exchangers?
Yeah the term "heat exchanger" describes a lot of things.
Okay I pulled the radiator out of my truck buy I'm not sure where to connect it or how much coolant I need to pour in my printer.
You connect the radiator to the FAN1 plug, you might need to crimp the tube to a cable connector though.
Probably an ERV or HRV for ventilation.
Yep, it's basically a simple air-to-air heat exchanger. Applicable to any hobby that will generally put fine particulate matter into the air. Laser cutting, woodworking, etc. Generally an overall good thing to have for a shop.
It's essentially a heat/cooling recovery unit so you're not simply pumping your A/C out into the world and wasting energy. It allows you to swap the air in a room out, without losing its cool/heat by simply pumping in outside air. The video explains what he used.
I'm just going to leave this here https://youtu.be/ht4tbCiFxeM?si=fQuV-vS4V0crt6Hf
Here is an alternative Piped link(s): https://piped.video/ht4tbCiFxeM?si=fQuV-vS4V0crt6Hf
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source, check me out at GitHub.
Thanks. I'm no expert at this chemistry, but this is the better reference IMO
Even if you're printing with anything but PLA, you should be ventilating well, since it obviously releases chemicals into the air -- you can smell it. PLA does as well, but from the smell it seems like a much different one.
PLA is used for medical implants, because it breaks down into lactic acid inside the body, so it's almost certainly safe.
Sure, but you still shouldn't inhale it.
YOU CANT TELL ME WHAT TO DO -- SNIFFFFF
What is the correct way to ventilate the 3D printers? How can you ensure accidental contact with resin won't ruin your life?
The correct way is basically this: Get a ventilation fan, and exhaust the air around the resin printer to the outside of your home. Learn proper safety procedures, with correct nitrile gloves, and VOC-rated respirator and use that to ensure you don't get resin on your skin. Resin print in the garage if possible. Resin likes warmer temperatures anyhow, it helps the chemical reaction occur. Make sure this ventilation fan is AT the window, because you don't want any of the pressurized air to leak back into your living space. You want it to suck air out of the room and vent it outside.
An upgraded system is going to cost more, but if you're in an air conditioned area - it will save you air conditioning costs. You need a heat recovery ventilator, and typically that will come with 2 blower fans, this isn't absolutely necessary but would be the "correct" way to do it. I'd opt for this if you're resin printing inside your home office and it's going to be a permanent thing, or if you're running lots of resin printers at once.
Here is an alternative Piped link(s): https://piped.video/watch?v=fjhmXzvbyfA
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source, check me out at GitHub.
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible