homelab.

This is an automated archive.

The original was posted on /r/homelab by /u/28tuesday on 2024-01-23 23:33:41+00:00.

I have:

• R720xd,
• Perc H710p D1 mini flashed into IT mode ()
• A SSD connected to the USB port near the SATA ports on the board, via a SATA to USB cable. This is where my TrueNAS is installed.

Questions:

1. When flash the H710p D1 mini, I forgot to note down the SAS address, but the flash worked, I got the pool setup in the TrueNAS with no problem... SO what would happpen here? since I missed the step of copying the old SAS back?
2. Every time it reboots, it will not boot in to the SSD, but showing "not bootable drive", IF I intercept the booting process, and enter into the BootManager, and I manually enter to BIOS setup, and select my SSD from the list, it works fine.. How do I set the SSD as a default boot drive so I don't have to manually select it every time?

Thank you !!