3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Ender 5 Pro with a few upgrades. 3DTouch sensor was the first upgrade I bought. Currently running a Hero Me Gen 7 toolhead with dual 5015 blower fans and a 4020 hotend cooling fan that I'm running at a lower voltage to reduce noise. Got an Orbiter 2.0 extruder mounted in direct drive which I love, great little extruder. V6 Clone All-Metal Hotend with a standard 0.4mm nozzle for now, but looking to get a CHT soon. I also recently got a spring steel textured PEI build plate, massive improvement over the stock floppy surface, I should have upgraded sooner. In my quest for less noisy printing, I've replaced the PSU and mainboard fans with two 120mm PC fans, works great so far.
The motion system is really the bottleneck now, it seems the limit is around 150mm/s with 1250mm/s^2 acceleration which is lower than Ender 5 Pro's I've seen on the internet, any higher than that and I get layer shifts. I'm looking to do the ZeroG Mercury conversion in the future.