this post was submitted on 07 Jul 2023
1 points (100.0% liked)

3DPrinting

15130 readers
18 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

I started 3d printing back when you had to build it all from scratch, and it seemed ABS was the only filament to be found. PLA came along soon enough and made things sooo much easier. Then came some more exotic ones like TPU or Nylon I think, but I never tried them out because they seemed pretty niche.

But now I'm getting back into it after some time and am seeing PETG popping up more and it seems to have become one of the mainstream materials now.

Are there any other key materials I should become aware of these days? Has PETG started to replace ABS as a superior "high-temp" filament? Does anyone have experience with these?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 0 points 1 year ago (1 children)

Prusament PC Blend is really nice to work with on their machines. It prints at 290C with a bed temp of 110C and is best to print with their glue stick, (although any gluestick will work, theirs just cleans off easier than some others). These temperature ranges are beyond the capabilities of many cheap printer project type machines and definitely outside of the hotend temperature range you should print at if you have PTFE tubing passing through the heatbreak and in contact with the butt of the nozzle.

[–] [email protected] 2 points 1 year ago

How are the voc's? I just upgraded to a p1p and I've just finishing building out an enclosure for it. Not actually sure what the extruder on this is rated for but I'm upgrading the hotend to hardened steel next so I can print a bento box in asa.

Might give PC a look if it's something I think this printer can handle.