6
this post was submitted on 19 Nov 2023
6 points (100.0% liked)
Movies
51 readers
2 users here now
**For news and discussion about movies!**
founded 1 year ago
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I worked at a movie theater a long time ago. I think intermissions also had to due with the physical limitations of the platters holding all that film. I remember the projectionist having to swap reels during the break. Now the movies are digital and come on a USB drive. I used to have to walk to the bus station with a dolly and pick up the movies.
Oh that's an interesting point. Intermissions died out here long before digital was introduced, but it might have been due to some other projection tech adopted with the rise of the multiplexes.
Come to think of it, multiplexes would probably hate intermissions because they would have to take tickets twics and it would cut down on sessions per day.
Film used to be broken down in "reels" which were individual old timey looking spools of film which would then get spliced together by the projectionist into one long continuous film which would then get run through the projector. This very long length of film would get spun onto a big platter. It would come off the platter, go through the projector, and back onto an empty platter. That platter could only hold so much physical film which would equate to a certain length of run time. That's what would dictate how long the movie could be without intermission. When the movie was done it's run, the projectionist would unwind the film from the platter and cut it apart again and wind it back onto the spools and put it back into the cases of 3 or 4 spools each and I'd carry it back to the bus station and send it to the next theater.
I'm low key jealous you had that job.
Can you think of any change in the celluloid projection tech that would have changed around the time intermissions stopped being a thing?
I think the big thing was the platter system. Older theaters might have had a different setup. We had a 16mm projector that you loaded more like a class room projector, where the reels loaded on the top and bottom.
I think movies got shorter and so fit on the platters. It was a rep theater, so we played old stuff. I remember Barry Lyndon was too long for one go.
I was just an usher lol
That must be one reason. I can think of plenty of 3hr+ movies I've seen in cinemas before digital conversion, though. Things like Malcolm X. A lot of it was probably 35mm so may have been a different system.
I think we were kind of late to the party. Indy cinemas were still converting to digital here in the 2000s.
I thought you were an apprentice projectionist.
No, a lowly usher. Lol! My step dad ran the theater though. Platter size and set up would definitely vary theater. Ours was new in the late 80's so it was probably pretty state of the art for the time. I was in a chain theater projection area once and the platters were all in one room and would feed down the hall to each projector and back to the platter. We had 3 platters, one for the 7:00, one for the 9:00 and the empty one for the one showing. We'd often have to lift the movie off the platter to allow for a different one. We had these clamp things that held the roll together so it didn't fall into spaghetti and we could swap movies. Movies are surprisingly heavy.
This is so interesting! I love hearing about stuff like this.
I do miss the old physical films. Even the dust and scratches if a print had been circulating a while. Not sure why, it sort of feels "warmer" to me which is pretty silly.
It's taking me down memory lane, thinking about it!