this post was submitted on 08 Oct 2023
54 points (96.6% liked)

Bicycles

3127 readers
20 users here now

Welcome to [email protected]

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!

Community Rules

Other cycling-related communities

founded 1 year ago
MODERATORS
[email protected]
54
Who plans to ride this winter? If so, share your gear and tips. (lemmy.ca)
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
26 comments fedilink hide all child comments
 

For me, I'll be using my 90s steel MTB.

I've already coated the inside of the frame with anti rust, got a rust resistant chain, and have studded tires at the ready. The studded tires will only go on if there's persistent icy conditions.

Packed marine grease into my hubs, bb ends, and headset bearings.

On my todo list, I'll be installing pogies/bar mitts, which have proven to be way better than any glove solution I tried last winter.

I also want to buy/make a mudflap to expend the front fender. This should prevent a considerable amount of grit, salt, melted snow from reaching my shoes, chain, crankset, etc.

As soon as salt goes down, my bike will get more cleaning around critical parts, and a frame wipe down after every ride.

I do have a winter cycling jacket and fleecy cycling pants, but feeling the cold on my body was never an issue last winter. A fleecy buff and helmet liner that gets over my ears are a must, and i may invest in a few extra pairs.

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 5 points 1 year ago (2 children)

Hands and cold protection are critical. Have you tested gloves? What brand and model?

For my bike: more frequent hand washing, then additional chain cleaning. A little more universal lubricant, like WD-40, and standard bicycle chain oil.

[–] [email protected] 11 points 1 year ago (2 children)

Just in case you or others didn’t realise, WD-40 isn’t a true lubricant. It is actually a solvent. Although it works as a lubricant in many cases, the effects are short lived (and shouldn’t be used to lubricate some things like locks as the will gum up).

[–] [email protected] 8 points 1 year ago (2 children)

This is true about the standard Wd-40 spray (WD = Water Displacement). However, the company did make 2 different actual chain lubes. One for wet, one for dry, and those work amazingly.

[–] [email protected] 3 points 1 year ago

Yup. I use the WD-40 degreaser (just easier to get), but also have used their wet and dry lube.

My preference for lube, however, has gone from the WD-40 lube to Wolftooth to Silca Synergetic (highly recommended!).

[–] [email protected] 2 points 1 year ago

Oh cool. Thanks for the info!

[–] [email protected] 1 points 1 year ago

Multilube similar to WD-40 is all I use on my chain. During summer time I apply it every 4th ride or so and in winter time or when it's just wet in general I use if after the ride to get rid of the moisture. I always wipe with a rag afterwards. Now my chain stays clean and shiny all the time unlike before when I used a proper chain lube which just collects dirt and still doesn't protect the chain from rust after it gets wet.

[–] [email protected] 3 points 1 year ago

Have you tested gloves? What brand and model?

All kinds, and they just got bulkier and more awkward to use the brakes/shifters. I haven't tried any lobster claw gloves, however, but they also seem too bulky for my liking. Not even heated gloves were as effective as pogies!

With pogies, my hands get so warm that I can quite literally either ride without any gloves or glove liners at most. LOL