Gardening

4932 readers

4 users here now

Your Ultimate Gardening Guide.

Rules

Be respectful and inclusive.
No harassment, hate speech, or trolling.
Engage in constructive discussions.
Share relevant content.
Follow guidelines and moderators' instructions.
Use appropriate language and tone.
Report violations.
Foster a continuous learning environment.

founded 2 years ago

MODERATORS

[email protected]

Built a custom sprinkler for my raised beds. (lemmy.world)

submitted 1 week ago* (last edited 1 week ago) by [email protected] to c/[email protected]

10 comments fedilink hide all child comments

Nothing too special, just some misting nozzles and some pvc.

The beds are 4x12’ with the heads spaced every 1’ starting and ending 2’ from the end.

Imgur video

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 14 points 1 week ago* (last edited 1 week ago)

Honestly not overly, I’ve dabbled with plumbing before.

Red seal Carpenter going on for 18 years, but I’ve also renovated my own house plumbing and electrical. This is just a larger version of an Aeroponics system I made for cannabis.

When I’m doing projects like this for my house this always pops into my head.

I had soaker hose last year, it didn’t survive to be installed again. This will be removed and put away for the winter.

I do know I will cut between the T and 90 to install a disconnect so it’s smaller for storage though, but that was planned to not be done yet.