Woodworking

7092 readers

13 users here now

A handmade home for woodworkers and admirers of woodworkers. Our community icon is submitted by @[email protected] whose father was inspired to start woodworking by Norm and the New Yankee Workshop.

founded 2 years ago

MODERATORS

[email protected]

Bench plane tuning question (self.woodworking)

submitted 4 weeks ago* (last edited 4 weeks ago) by captain_aggravated to c/[email protected]

12 comments fedilink hide all child comments

So I've got a goofy issue tuning my ~~block~~ bench plane. It's one of the Pony Jorgensen #4 smoothing planes they're selling at Lowe's in the States. Works pretty well with one exception: Moving the frog forward to bring the iron closer to the mouth also advances the iron.

I can't get it anywhere near as closed as you're supposed to with a smoothing plane before I can't retract the iron sufficiently. The mating surface in the sole that the frog rests on is slightly angled downward, so the frog is lowered as it is moved forward. I can't realistically bring the iron any farther on the chip breaker than I've got it.

As I had it apart, I noticed the finish on the bottom of the frog, the surface that mates with the sole, was as cast, it isn't machined or lapped. Should it be?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 3 weeks ago

I was misremembering because my block plane blade has multiple notches like this example. My larger planes don’t. Example blade: https://www.leevalley.com/en-us/shop/tools/hand-tools/planes/blades/117808-o1-stanley-block-plane-blades-made-by-veritas?item=05P3173