Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Please don't post about current US Politics. If you need to do this, try [email protected]
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected].
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
You are my kind of admin, so, any suggestions on hardware that use starlight sensors? Or anything comparable in low light with color?
Good question! starlight/night color cameras generally just have larger CMOS sensors to capture more light, OR they integrate an LED "spotlight" into the camera housing to increase the amount of light available to the sensor, and if that's not enough, the IR will kick in. Sometimes the sensor IS actually larger, and sometimes it isn't.
We've standardized on Amcrest cameras, and while we haven't actually tested it, Amcrest does have a "night color" outdoor turret camera that appears to support both ONVIF and RTSP, for the same price as the "regular" turret camera. The model number is IP5M-T1277EW-AI.
If it's like other similar Amcrest cameras, you can likely disable the AI stuff via the built-in configuration, especially if you have Frigate doing that for you.
Personally, I prefer a solution that uses a regular IP camera and a separate smart light (or regular light on a smart plug) that kicks on when motion or a tagged object is detected, which will then cause the camera to switch from black and white IR to color, usually in about a second. The separate light will give you a much better image than anything you'll get from a built-in LED or slightly larger sensor, in my opinion.
Home Assistant and Frigate make it easy to set up this kind of automation, and the "regular" Amcrest cameras have pretty good IR, so Frigate has no problem running detection on those feeds. The automation is basically "if a cat is detected on the garage camera, turn on the garage lights for x minutes".
Hope that helps!
Thanks, I'm currently using some RTSP modded WyzeV3s with HA and some custom ffmpeg scripts. Just wondering about other options.