Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected].
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
Found it. Since the gas goes through the same hose as the other blends, if you're buying gas you need to get at least 4 gallons so the previous gas flushes out what was left in the hose from the previous sale, and fills enough of the container that the blend is primarily what you selected.
If you buy E15 and fill your tanks, then the next guy buys E10 and only gets 1 gallon, they might end up with a higher ethanol mix than intended, and if they use that on a small motor, like a chainsaw, it could ruin the seals.
I'm in Europe and I have never in my life seen a gas station that dispenses every fuel through just one hose.
Every fuel has its own hose and "pistol". Each "pump" has two or three or four hoses.
In America, if a corner exists a company will cut it.
It feels like blending hoses would be a more complicated setup?
Multiple tanks hooked up to one valve and hose vs. multiple tanks with their own separate valves and hoses.
Obviously, it's a different kind of valve in the first setup to prevent backflow into other lines, but that's probably about the extent of it. With the second setup, you probably need to run a new line and pump for each station for each gas type, compared to just tying the tanks into the one valve and pump per station.
I'm not a plumber or anything, though, so take it with a grain of salt.
I feel like we should specific for Europeans or whomever that there is definitely a different hose for Diesel