capably8341

joined 9 months ago
[–] capably8341 2 points 1 day ago

I wish I knew this months ago! This knowledge needs to be spread around more.

Also, if your phone doesn't show up on the deck, make sure to enable "show all devices"

[–] capably8341 5 points 1 week ago (1 children)

Correct me if I'm wrong, but didn't Prusa specifically say you don't need to keep the CORE One doesn't need to be open because of its temperature control?

[–] capably8341 3 points 4 weeks ago

Been using it for about five years now. I absolutely love it. But I will say some of these comments make it sound like it's a little easier than it is. I'd say about 80% of your knowledge from Android will transfer over and just work. But the last 20% is a bit of a learning curve, and will take at least a few weeks to get the hang of.

What I recommended to some of my friends that switched is to get the phone and mess around with it for a few weeks before you switch your sim. Then you'll get the hang of things like alternative app stores and sandboxed play services, and you'll figure out what you can and can't do.

I will say the vast majority of things do work easily because of protection compatibility mode and sandboxed play services. But there will be some things that are just more hassle then they're worth. I find keeping a second device, like a tablet, without a custom ROM makes that stuff easier.

And there are some things that seem impossible to get working properly, at least for me. For example, casting to a TV is basically impossible from what I can tell. Also, tap to pay, even for things like tickets doesn't work (although if you have play services, you can use Google wallet for things with barcodes).

Overall, it's totally worth trying out. Just don't set your expectations too high. You're not getting a completely "just works" experience.

As for other custom ROMs, I've tried CalyxOS and LineageOS for MicroG. I didn't find either of them quite as good, but that was many years ago. Maybe they've gotten better.

[–] capably8341 8 points 1 month ago

I've been reading the other comments, and while people are encouraging, their comments seem a bit too "you HAVE to learn CAD." You definitely don't NEED to know CAD. I made basic parts and modifications in the slicer for nearly a year after I started printing, and it worked really well. However, if you are considering learning a full CAD program, I have two pieces of advice.

First pertains to if you are working with functional parts. Then you are talking about a parametric CAD program (fusion, onshape, FreeCAD, etc.). In this case, I think it's worth learning for you, and it's not as hard as it seems. You say you have SketchUp experience, so I'm assuming you have decent spatial reasoning. I know someone with no tech literacy nor programming experience who learned a CAD program very well in less than a month of following tutorials in her free time. Just give it a try, and it's a skill you'll be happy to have.

If you are working with cosmetic parts like miniatures and helmets, then you might need to use something like Blender. Admittedly, that can be even more challenging than the other CAD programs I mentioned. However, if you spend a few hours learning some basics from YouTube, you should be able to do fundemental things like fixing holes.

Hope this helps. Good luck with your printing endeavors!

[–] capably8341 3 points 1 month ago (1 children)

Interesting idea. How easy is it to start and LLC?

[–] capably8341 6 points 1 month ago (4 children)

I love virtual cards. I use privacy.com for all my online stuff. Not a solution for this purpose unfortunately.

As for your divide-it-up approach, that's an interesting thought. I guess I'm a little concerned about signing up for several cards with several companies and several privacy policies. Feels a little weird to me, but I do see the merit in not having all your eggs in one basket.

As far as the Apple Card and Goldman Sachs is concerned, I'm still trying to figure out which details are given to whom. Its hard to find info about it. I wouldn't be surprised if you're right and it's the same as any other card from Goldman Sachs.

 

First, I understand that the best options are cash, gift cards, burner cards, XMR, etc. However, that isn't practical for my day to day use. My goal is minimizing how much information is collected/sold by advertisers.

I need a new physical credit card and figured I should look for one with a decent privacy policy. I'm curious if anybody has any suggestions.

The only one that I've found even decent so far is Apple's card, but I don't have an iPhone. I also know Apple is generally disliked on here.

[–] capably8341 3 points 2 months ago (1 children)

You can have a primary network and guest network. As far as I can tell, you can't have more than that.

You can set DNS manually.

Here is a link to a pretty comprehensive user guide that explains all the settings. Maybe I missed something about the SSIDs. https://static.inseego.com/us/download/mifixpro-userguide-tmobile.pdf

[–] capably8341 3 points 2 months ago (3 children)

I recently got their hotspot and its been good. I got the MIFI X PRO 5G and have no complaints. I can't speak to the privacy of it, but it uses a T-Mobile sim card. Do you have any questions in particular?

 

I'm curious about the creative ways people store spools. Seen some interesting ideas online. Share pictures if you can.

Currently, I just have bins full of about a dozen spools each, but it isn't elegant or pretty. Need some new ideas.

[–] capably8341 5 points 3 months ago

I try to buy things on GOG when I can just for the sake of diversifying my dependence on one company.

There are plenty of guides to setting up Heroic Launcher on the Deck. Once its set up, it's easy to install games.

I've found GOG games to run perfectly fine, and cloud saves work perfectly.

Lastly, I saw some other people saying GOG doesn't have the latest version of this game specifically, so definitely check that before buying.

[–] capably8341 3 points 4 months ago* (last edited 4 months ago)

Admittedly, some of the games I'm about to mention take time to get good enough at to turn your brain off, but here's some of my favorites for listening to audiobooks.

Bloons TD6

Any roguelite - currently I'm loving balatro and spelunky 2

Backpack battles

Tetris Effect

Mario sports games

Mini Metro

Kingdom

In general, I find it helpful to tell yourself that it's totally okay to "lose." When you are listening to an audiobook, you should be spending most of your attention on that. You don't need to take the game seriously.

[–] capably8341 2 points 6 months ago (1 children)

Thanks for replying! I like your suggestions.

[–] capably8341 10 points 6 months ago

In addition

  • They have filed some controversial/anti-innovative patents.

  • Their printers phone home with encrypted information. Last I checked, there were speculated security and privacy issues with it, though someone should correct me if this was resolved.

  • They only open source their slicer because of the GPL licence, but they don't open source anything else (firmware, hardware, etc).

Again, I just recommend people look into these things before they buy a printer. Do your own research and come to your own conclusions :)

 

Hello,

I am trying to figure out which printer with multi-color capabilities to buy, and I'd like to hear some other people's opinions.

Note: I can't buy Bambu Labs products, so please do not recommend one.

Current options:

  • Prusa Mk4 and MMU3.
  • Voron 2.4-style (either Formbot kit or Sovol SV08) and ERCF, and eventually DAKSH toolchanger.
  • Ratrig V4 and the upgrades when they come out.
  • Creality K2 Plus (when it comes out).
  • Qidi Q1 Pro and the rumored multi-color unit.

My current thoughts:

  • I am happy wait a bit if that's the best option.
  • I like the fact that the MMU3 mechinism doesn't waste as much filament as some other mechanisms. It's easier for me to pay more up front for the mechanism than constantly keeping tons extra filament in stock.
  • The potential for a Voron to be upgraded to a toolchanger with DAKSH is intising.
  • High print quality is important to me, although I can't imagine any of these would result in bad quality.
  • Prusa XL is outside my budget :(

Please let me know your opinions, and thank you to anybody who read this far.

view more: next ›