JoaGamo

joined 11 months ago
[–] [email protected] 1 points 9 months ago

Each slot Will have 75w. Can confirm as i'm using 2 1050 in a server

[–] [email protected] 1 points 9 months ago

GTA Vice City Stories, if you saved the game after getting paid by your businesses (at 6:00 am ingame if I remember correctly) you get paid again. Keep saving the game continuously for infinite money

[–] [email protected] 1 points 9 months ago

500w idle, 900w under load, 360kW/month

Costs around 13$ USD

[–] [email protected] 1 points 9 months ago (1 children)

How? Are you loading a configuration in a device plugged in each hypervisor server? Any project i should read further?

 

As i'm at a point of increasing my actual 4 server count, how should I handle storing the OS of each server?

Problem: I have no money and I'm looking for a way to buy more servers without buying and taking care of new boot ssds.

The actual setup is that each server has their own 120/240gb ssd to boot from, and one of my servers is a NAS.

at first I thought of PXE persistent boot, but how would I assign each machine their own image is one of the problems..

I've found this post talking about Disk-less persistent PXE, but it's 5 years old, it talks about SAN booting, but most people I've seen in this sub are against fiber-channel protocol, probably there's a better way?

Without mentioning speed requirements (like a full-flash NAS or 10+gbit), Is it possible to add more servers, without purchasing a dedicated boot device for each one?

[–] [email protected] 1 points 10 months ago

If you ever get a system that supports hardware transcoding, consider jellyfin instead of plex, transcoding has no $cost there

[–] [email protected] 1 points 10 months ago

Whatever is CMR and good enough. WD red, Ironwolf, etc

I've got a lot of random hdds, highest capacity are 4TBs ones, all in ceph nodes

[–] [email protected] 1 points 10 months ago

Where is Clank?

[–] [email protected] 1 points 10 months ago

Thanks, I guess i'll pick an amd system for the best performance/$

[–] [email protected] 1 points 10 months ago (2 children)

I don't have access to Epyc

 

Hello, i'm very tight on money, i'm looking to expand my homelab

Use case is virtualization for productivity/gaming/AI workloads

I've been looking at a few xeon v4 cpus, like the 2660 v4 or the 2680 v4, both should work fine for 2-4 VMs running off it. Some servers for example are the Dell R730 which could fit 2 GPUs or preferably custom boards with the X99 chipsets.

Prices available in my region for a (used) Dell r730 machine range between 900-1000$, including 64gb ram and dual Xeon 2603/2620 v4 cpus, while a consumer system with (used parts) i7 10900k (or the AMD equivalent) and 64gb ram costs 500-800$

Are these xeon machines worth buying long-term (4-5 years)? I've been also looking at consumer options, but I'm not sure of the main differences between both consumer vs enterprise machines

"EPYC"-based machines are not available in my location, neither ebay/amazon, so i'm very limited in options, what should I pick? A Xeon v4 machine or a AMD/Intel consumer system?

[–] [email protected] 1 points 11 months ago

literally r/lostredditors