CondorWonder

We need more information to recommend anything. Do you need high voltage switching? Do you have zigbee, zwave, or only wifi available? How much integration or local on device control do you actually want or need?

I’d have to check my iptables syntax again but I’m not sure you want the FORWARD between the networks unless C has a manual route to get traffic for the 192.168.15.0/24 network back via B. You just want to NAT A behind B’s IP on 192.168.38.0/24. I think the forwards are sending the traffic without doing NAT on A.

Phillips SonicCare for 20+ years. I think it’s helped me a lure with my dental care. Various models as the batteries wear out. The latest has Bluetooth that I never use but that doesn’t affect the cleaning part.

Ohhh I haven’t seen that Zooz relay before, hopefully I can get it in Canada. Going to see about replacing the Shelleys I’ve got deployed then

The thermostat should be a passive device and is really just a relay on its own. It could be connected to the switch pins on a Shelly.

I don’t know of a compact zwave dry relay though - so this does mean 2.4ghz wifi.

If it’s like one I rented a few years ago, yes the thermostat just controls a fan, and the radiator is always hot or cold as it’s controlled by the building. I’d be inclined to use a Shelly or other dry relay with a virtual thermostat in home assistant now.

The phone or browser may be using DNS over HTTP (aka DoH), check if you can disable it for the wifi network. You may have to disable it on the phone or browser to get your desired behaviour - look up directions for your browser.

This. Basically few addons are ‘fire and forget’, almost all of them need some sort of configuration that’s listed in the Documentation tab, or in the add-ons repo. You’ll need to read up on it and look at the Configuration tab to set whatever you need to allow it to work.

Right now - easy, with the difficulty going up over time as the main Chromium codebase continues to change (and especially as it gets security updates). I think I’ve read that some variants (Brave?) have committed to supporting ManifestV2 for as long as possible, for instance with their own fork.

I do this with my desktop - I work from home so it’s really nice to have my PC ready by the time I get down to it. There’s a workday integration too, set your typical schedule and it’ll be true when it’s a workday - with a motion sensor as the trigger as my start time varies if I have meetings In the morning.

This is one of the first things I set up with HA for fun but the convenience is really nice.

If it’s logs, there’s a package called log2ram - it’s designed for small form factor systems to reduce writes to SD cards but does apply anywhere you want to log but not hit disk immediately. It syncs logs to disk on a regular basis so you don’t lose much if the system crashes.

From a Linux command line it would be the command called arp, you need to add a static arp entry. I don’t know how that works on sense, but on Linux it would be something like arp -s IP MAC

Maybe there’s a module in opnsense to help. The way I’ve done this before is using a machine connected to the same network at my target to wake up by logging into that machine and issuing the wake command.