this post was submitted on 12 Jun 2023
72 points (95.0% liked)

SpaceX

1975 readers
10 users here now

A community for discussing SpaceX.

Related space communities:

Memes:

founded 2 years ago
MODERATORS
72
submitted 2 years ago* (last edited 1 year ago) by threelonmusketeers to c/spacex
 

SpaceX Starship page

FAQ

  1. When (first) orbital flight? First integrated flight test occurred April 20, 2023. "The vehicle cleared the pad and beach as Starship climbed to an apogee of ~39 km over the Gulf of Mexico – the highest of any Starship to-date. The vehicle experienced multiple engines out during the flight test, lost altitude, and began to tumble. The flight termination system was commanded on both the booster and ship."
  2. Where can I find streams of the launch? SpaceX Full Livestream. NASASpaceFlight Channel. Lab Padre Channel. Everyday Astronaut Channel.
  3. What's happening next? SpaceX has assessed damage to Stage 0 and is implementing fixes and changes including a water deluge/pad protection/"shower head" system. No major repairs to key structures appear to be necessary.
  4. When is the next flight test? Just after flight, Elon stated they "Learned a lot for next test launch in a few months." On April 29, he reiterated this estimate in a Twitter Spaces Q&A (summarized here), saying "I'm glad to report that the pad damage is actually quite small," should "be repaired quickly," and "From a pad standpoint, we are probably ready to launch in 6 to 8 weeks." Requalifying the flight termination system (FTS) and the FAA post-incident review will likely require the longest time to complete. Musk reiterated the timeline on May 26, stating "Major launchpad upgrades should be complete in about a month, then another month of rocket testing on pad, then flight 2 of Starship."
  5. Why no flame diverter/flame trench below the OLM? Musk tweeted on April 21: "3 months ago, we started building a massive water-cooled, steel plate to go under the launch mount. Wasn’t ready in time & we wrongly thought, based on static fire data, that Fondag would make it through 1 launch." Regarding a trench, note that the Starship on the OLM sits 2.5x higher off the ground than the Saturn V sat above the base of its flame trench, and the OLM has 6 exits vs. 2 on the Saturn V trench.

Quick Links

RAPTOR ROOST | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE

Relevant Reddit threads (though these likely won't be accessible during the blackout).

Starship Dev 46 | Starship Dev 45 | Starship Dev 44 | Starship Dev 43 | Starship Thread List

Official Starship Update | r/SpaceX Update Thread


Status

Road Closures

No road closures currently scheduled

No transportation delays currently scheduled

Up to date as of 2023-07-09


Resources

I'll attempt to keep this post current with links and major updates, but would be greatly helped by information supplied by the community. I hope this can be an alternate place to discuss Starship development. While the Starship Development Threads on Reddit are not party threads, Lemmy is still small enough that I don't imagine that strict moderation will be needed in the short term.

top 50 comments
sorted by: hot top controversial new old
[–] RaphTheSwissDude 12 points 2 years ago (1 children)

Elon thinks the next launch will be in 6 to 8 weeks

load more comments (1 replies)
[–] [email protected] 12 points 2 years ago (1 children)
[–] [email protected] 11 points 2 years ago

And being lifted in place as we speak. NSF coverage: https://www.youtube.com/live/mhJRzQsLZGg?feature=share

[–] [email protected] 12 points 1 year ago* (last edited 1 year ago) (2 children)

Unrolled tweet thread at threadreaderapp.com by Ryan Hansen Space @RyanHansenSpace. It's a look at the details of the steel plate parts and assembly under the Orbital Launch Mount.

load more comments (2 replies)
[–] [email protected] 11 points 2 years ago

RGV Sneak Peek shows some nice shots of the steel plates, as well as the pour under the OLM. Looks like a lot more concrete is needed though, wonder when that’ll happen.

The steel plates look ready for transport, so I bet this next pour will be soon — it seems to be the main hold up.

[–] roomey 10 points 2 years ago

This is great thank you, I started following spacex Reddit in the echologic (was that his name?) Days, but the sub got a bit, I dunno, it started to lack a certain something. Just got too big maybe.

I'm happy to see this here! Thanks for starting it, sorry for the off topic 😂

[–] JohnnyCanuck 10 points 2 years ago

I'm leaving reddit permanently, so thanks for maintaining this!

[–] [email protected] 10 points 2 years ago* (last edited 2 years ago) (1 children)

SpaceX @SpaceX on Twitter

Ship 25 completes a six-engine static fire test at Starbase in Texas

11 seconds. In the audio, only a little bit of HONK at the end.

Someone pointed out that the flames start out as a triangle, but then switch rotated 60 degrees when the vacuum engines start - V to ^.

A comment in The Other Place mentioned that it looks like a little spalled concrete at 4 seconds in.

load more comments (1 replies)
[–] 675longtail 10 points 2 years ago

Ship 25 flaps were tested at 12:43 CDT

[–] SantacFan 9 points 2 years ago* (last edited 2 years ago) (2 children)

Starbase live-

9:15am cdt- 11 more loads of rebar have been lifted over to the OLM since midnight. LR11000 still holding the deluge pipe in position to be welded.

Edit-

10:48am- Deluge pipe is moved to the side of the underground pipe bunker and laid down on the ground.

11:50am- 8 more bundles of rebar have been lifted over to the OLM. Some presumably extra bent pieces have been lifted away as well.

1:11pm- Deluge pipe raised again and moved back to join the pipe that goes underground.

5:00pm- Since noon there has been 15 more loads of rebar craned over to the OLM. Most loads appear to be multiple pieces but there are several large bent pieces that have been moved one at a time.

9:00pm- 10 more loads of rebar have been moved over. (44 for the day so far and 56 in the last 40 hours)

load more comments (2 replies)
[–] [email protected] 9 points 2 years ago (2 children)

So the big news of the day and night was what is believed to be the center plate of the water deluge system. It is thought that it will be placed directly under the Orbital Launch Mount.

@[email protected] already posted (at top level) "CSI Starbase video on new Deluge system", a deep dive part 1. The URL I see for the post is https://lemmy.world/post/879748 , because that's how I access this. The canonical one is https://lemm.ee/post/530280 .

CSI Starbase SPMT Tracker @SpmtTracker posted a tweet with a picture of what is very likely to be a vertical stand for the center plate. The image is on Imgur. The tweet is here. Ryan Hansen Space @RyanHansenSpace tweeted a rendering of how it might look under the OLM. This should be the image:

@[email protected] posted below (if sorted by new) a link to a 13-minute video by Starship Gazer, of people working in the tent on the center plate. https://lemm.ee/comment/534238 . Someone commented that, from 4 minutes on, it's comedy gold. People were grinning around them. I'm told that someone is standing on top of the cheater pipe at one point.

NASASpaceflight posted a video of the rollout of the center. It's about 1 hour 26 minutes long. The stand / jig was on the first truck; the center plate with some people on it was on the next truck. The clearest views are about 17 minutes on.

[–] [email protected] 7 points 2 years ago (1 children)

Thanks for your updates @[email protected]. I know our community here is small so I'm glad some of us keep putting in the effort :)

[–] [email protected] 7 points 2 years ago

Same to you, bud! I figure I'll keep blowing on the embers. Either the flame will catch (& I get to boast "I was into Lemmy before it really took off"), or my lungs will get too tired.

load more comments (1 replies)
[–] [email protected] 9 points 2 years ago (1 children)

More pour info, this time from tweets from Zack Golden @CSI_Starbase. The truck counts basically match those from @[email protected]'s post earlier.

SpaceX has received their final load of concrete for today's Orbital Launch Mount foundation work. Here are the totals after the 15.3 hour marathon:

June 25th - 132 Truck loads

July 3rd - 171 Truck loads

Total Volume = 2,302 m^3 = 3030 yd^3

Total Weight = 5,411 Tons

For reference, a Fully loaded Starship ~ 5,000 Tons

Note: There were 4 additional trucks that showed up but were turned back around without offloading.

Shoutout to agents @VickiCocks15 and @SpmtTracker for keeping track of all these.

4:11 PM · Jul 3, 2023

and

Obviously this number is significantly greater than we predicted. For those who asked, that previous number was not considering the area in yellow, which were also completed today. This area is technically outside of the true foundation of the OLM

with a picture by RGV Aerial Photography.

[–] [email protected] 5 points 2 years ago (1 children)

So am I understanding this correctly that today's pour was a) directly under the OLM (where the showerhead is going) and b) in the yellow area?

load more comments (1 replies)
[–] RaphTheSwissDude 9 points 2 years ago

Yooooo

Road closure is now scheduled for tomorrow!

[–] SantacFan 8 points 2 years ago

I was summoned out of my Christmas lair for an update. I see the cladding was already mentioned.

Starbase live- Yellow crane to the left of OLM has been lifting rebar over to the pit most of the day.

(I missed part of the morning but I’ve counted at least 12 loads so far)

Rover 2-

20:43 cdt- The large deluge pipe that we saw test fitted last night has now been painted white and is lifted back over to where the pipes go underground by the tanks.

[–] mars2033 8 points 2 years ago

Ship 25 completed a flight-like chill and spin of the Raptor engine pumps, stopping just before engine ignition. As a result of the test, cryogenic liquid oxygen formed a visible cloud beneath the ship. This checked out vital systems in advance of the upcoming static fire.

source

[–] [email protected] 8 points 2 years ago* (last edited 2 years ago) (8 children)

John Kraus @johnkrausphotos:

In a Twitter Space with @ashleevance, @elonmusk shares that Starship will hot-stage during the next flight, lighting engines on the ship with some engines still running on the booster, as to Never Stop Thrusting!™️

"Hot staging" is firing the upper stage engines while it's still nominally attached to the lower stage (like resting on or loosely attached). The advantages that I gather exist: It's fast. It takes care of stage separation without needing springs or little rockets or a flip or anything. Before firing a liquid-fueled stage that may have gases in a tank ("ullage"), you have to settle the contents so that the engine intakes suck only liquid (maybe using "ullage rockets"), but if you're still accelerating at separation, that's automatically taken care of.

But if you intend to reuse the first stage, well, I wonder whether six engines igniting will be too hard on it.

Apparently U.S. Titan rockets, a lot of Soviet / Russian ones (Soyuz, Progress, N-1), and (some?) Chinese Long March rockets were designed with hot staging.

Joe Barnard @joebarnard replies: "'okay so when I hot stage it’s “an anomaly” and I’ve “torched another flight computer” but when SpaceX does it it’s fine???'

load more comments (8 replies)
[–] [email protected] 8 points 2 years ago* (last edited 1 year ago) (1 children)

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters More Letters
FAA Federal Aviation Administration
FTS Flight Termination System
LOX Liquid Oxygen
MECO Main Engine Cut-Off
~ MainEngineCutOff podcast
N1 Raketa Nositel-1, Soviet super-heavy-lift ("Russian Saturn V")
NSF NasaSpaceFlight forum
~ National Science Foundation
OLM Orbital Launch Mount
QD Quick-Disconnect
SPMT Self-Propelled Mobile Transporter
Jargon Definition
Raptor Methane-fueled rocket engine under development by SpaceX
cryogenic Very low temperature fluid; materials that would be gaseous at room temperature/pressure
~ (In re: rocket fuel) Often synonymous with hydrolox
hydrolox Portmanteau: liquid hydrogen fuel, liquid oxygen oxidizer
iron waffle Compact "waffle-iron" aerodynamic control surface, acts as a wing without needing to be as large; also, "grid fin"
ullage motor Small rocket motor that fires to push propellant to the bottom of the tank, when in zero-g

13 acronyms in this thread; the most compressed thread commented on today has 4 acronyms.

[Thread #0 for this sub, first seen 15th Jun 2023, 07:42] [FAQ] [Full list] [Contact] [Source code]

[–] [email protected] 10 points 2 years ago

Heyhey, Decronym for Lemmy, that must be a good sign!

[–] [email protected] 7 points 1 year ago* (last edited 1 year ago)

Much lifting and lowering and all sorts of craney stuff, but it's believed that all the manifolds are in place by now. A nice Imgur picture of a manifold being craned.

[–] [email protected] 7 points 2 years ago* (last edited 1 year ago) (1 children)

New comment from /u/santacfan on Reddit:

Starbase live-

8:57am- Black pipe lifted over towards the dog house area (most likely a cryo pipe but couldn’t tell for sure)

9:07am- LR11000 moves a deluge pipe. Lifted over to the work area by where the deluge stand is parked

9:30am- Second deluge pipe lifted. Moved to the same area

9:54am- 3rd deluge pipe moved

10:12am-4th deluge pipe moved (So apparently all of the pipes they moved to the side a couple weeks ago, they’re moving back over to be worked on)

10:20am- Looks like all of the boards have been removed and now they are starting to remove the metal poles of the scaffolding below the OLM.

10:26am- 5th deluge pipe moved. Crane didn’t swing back over this time so the Y pipe looks like it will stay in it’s current position

12:15pm- Scaffolding continues to be removed

2:15pm- Crane is starting to use the bucket to lift loads off of the top of the OLM as well as underneath.

5:15pm- Crane has lowered and left the OLM area. The 2 man lifts that have been working on the scaffolding have also lowered. Work continues around the base of the OLM.

6:30pm- Crane and man lift back up working on the BQD side of the OLM

9:15pm- Fireworks

9:25pm- SPI fireworks

(This gets synced)

load more comments (1 replies)
[–] [email protected] 7 points 2 years ago (2 children)

Check out this RGV picture from the plate in the tent from above: https://twitter.com/rgvaerialphotos/status/1674925187437928450?s=46&t=Mj914Aam14loAYQOISZ9zQ

I know Twitter links are kind of impossible to follow right now, but don’t think I can embed an image in a comment. Anyway, that plate is huge, will be interesting to see them lift and transport it.

[–] ludu 6 points 2 years ago
load more comments (1 replies)
[–] [email protected] 7 points 2 years ago (1 children)

What about it!? @FelixSchlang tweet from 3:03 PM - Jun 29, 2023:

It happened!!!

SpaceX opened the wall to the inventory tent and revealed one of the water deluge plates to us up close and countless other things in there!

High res pictures for supporters on all platforms coming soon!

The image alone.

In a reply, they said it looks to be upside down.

In The Other Place, u/warp99 wrote,

Looks like the segments are around 400mm thick and constructed from 40mm (38mm=1.5"?) steel plate The overall shape is a hexagon about 10m across the flats with each corner notched out.

They also speculated on how to weld the edges together: maybe put them on a stand above the final location, weld them from above and below, attach cranes and remove the stand, lower into place.

Starship Gazer (as seen on Nitter) had more pictures.

load more comments (1 replies)
[–] threelonmusketeers 7 points 2 years ago* (last edited 2 years ago) (3 children)

Vehicle Status

As of June 9th 2023

Follow Ring Watchers on Twitter and Discord for more.

Ship Location Status Comment
Pre-S24 Scrapped or Retired SN15 and S20 are in the Rocket Garden, the rest are scrapped.
S24 In pieces in the ocean Destroyed April 20th: Destroyed when booster MECO and ship stage separation from booster failed three minutes and 59 seconds after successful launch, so FTS was activated. This was the second launch attempt.
S25 Launch Site Testing On Feb 23rd moved back to build site, then on the 25th taken to the Massey's test site. March 21st: Cryo test. May 5th: Another cryo test. May 18th: Moved to the Launch Site and in the afternoon lifted onto Suborbital Test Stand B.
S26 Rocket Garden Resting No fins or heat shield, plus other changes. March 25th: Lifted onto the new higher stand in Rocket Garden. March 28th: First RVac installed (number 205). March 29th: RVac number 212 taken over to S26 and later in the day the third RVac (number 202) was taken over to S26 for installation. March 31st: First Raptor Center installed (note that S26 is the first Ship with electric Thrust Vector Control). April 1st: Two more Raptor Centers moved over to S26.
S27 Rocket Garden Completed but no Raptors yet Like S26, no fins or heat shield. April 24th: Moved to the Rocket Garden.
S28 High Bay 1 Under construction February 7th Assorted parts spotted. March 24th: Mid LOX barrel taken into High Bay 1. March 28th: Existing stack placed onto Mid LOX barrel. March 31st: Almost completed stack lifted off turntable. April 5th: Aft/Thrust section taken into High Bay 1. April 6th: the already stacked main body of the ship has been placed onto the thrust section, giving a fully stacked ship. April 25th: Lifted off the welding turntable, then the 'squid' detached - it was then connected up to a new type of lifting attachment which connects to the two lifting points below the forward flaps that are used by the chopsticks. May 25th: Installation of the first Aft Flap (interesting note: the Aft Flaps for S28 are from the scrapped S22).
S29 High Bay 1 Under construction April 28th: Nosecone and Payload Bay taken inside High Bay 1 (interesting note: the Forward Flaps are from the scrapped S22). May 1st: nosecone stacked onto payload bay (note that S29 is being stacked on the new welding turntable to the left of center inside High Bay 1, this means that LabPadre's Sentinel Cam can't see it and so NSF's cam looking at the build site is the only one with a view when it's on the turntable). May 4th: Sleeved Forward Dome moved into High Bay 1 and placed on the welding turntable. May 5th: Nosecone+Payload Bay stack placed onto Sleeved Forward Dome and welded. May 10th: Nosecone stack hooked up to new lifting rig instead of the 'Squid' (the new rig attaches to the Chopstick's lifting points and the leeward Squid hooks). May 11th: Sleeved Common Dome moved into High Bay 1. May 16th: Nosecone stack placed onto Sleeved Common Dome and welded. May 18th: Mid LOX section moved inside High Bay 1. May 19th: Current stack placed onto Mid LOX section for welding. June 2nd: Aft/Thrust section moved into High Bay 1. June 6th: The already stacked main body of the ship has been placed onto the thrust section, giving a fully stacked ship.
S30+ Build Site Parts under construction Assorted parts spotted through S34.
Booster Location Status Comment
Pre-B7 & B8 Scrapped or Retired B4 is in the Rocket Garden, the rest are scrapped.
B7 In pieces in the ocean Destroyed April 20th: Destroyed when MECO and stage separation of ship from booster failed three minutes and 59 seconds after successful launch, so FTS was activated. This was the second launch attempt.
B9 High Bay 2 Raptor Install Cryo testing (methane and oxygen) on Dec. 21 and Dec. 29. Rollback on Jan. 10. On March 7th Raptors started to be taken into High Bay 2 for B9.
B10 Rocket Garden Resting 20-ring LOX tank inside High Bay 2 and Methane tank (with grid fins installed) in the ring yard. March 18th: Methane tank moved from the ring yard and into High Bay 2 for final stacking onto the LOX tank. March 22nd: Methane tank stacked onto LOX tank, resulting in a fully stacked booster. May 27th: Moved to the Rocket Garden. Note: even though it appears to be complete it currently has no Raptors.
B11 High Bay 2 Under construction March 24th: 'A3' barrel had the current 8-ring LOX tank stacked onto it. March 30th: 'A4' 4-ring LOX tank barrel taken inside High Bay 2 and stacked. April 2nd: 'A5' 4-ring barrel taken inside High Bay 2. April 4th: First methane tank 3-ring barrel parked outside High Bay 2 - this is probably F2. April 7th: downcomer installed in LOX tank (which is almost fully stacked except for the thrust section). April 28th: Aft section finally taken inside High Bay 2 to have the rest of the LOX tank welded to it (which will complete the LOX tank stack). May 11th: Methane tank Forward section and the next barrel down taken into High Bay 2 and stacked. May 18th: Methane tank stacked onto another 3 ring next barrel, making it 9 rings tall out of 13. May 20th: Methane tank section stacked onto the final barrel, meaning that the Methane tank is now fully stacked. May 23rd: Started to install the grid fins. June 3rd: Methane Tank stacked onto LOX Tank, meaning that B11 is now fully stacked. Once welded still more work to be done such as the remaining plumbing and wiring.
B12 High Bay 2 (LOX Tank) Under construction June 3rd: LOX tank commences construction: Common Dome (CX:4) and a 4-ring barrel (A2:4) taken inside High Bay 2 where CX:4 was stacked onto A2:4 on the right side welding turntable. June 7th: A 4-ring barrel (A3:4) was taken inside High Bay 2. June 8th: Barrel section A3:4 was lifted onto the welding turntable and the existing stack placed on it for welding. June 9th: The next 4-ring barrel (A4:4) was taken inside High Bay 2, later in the day the incomplete LOX tank stack was hooked up to it and placed on the welding turntable for stacking and welding.
B13+ Build Site Parts under construction Assorted parts spotted through B17.
[–] numberedcompany 14 points 2 years ago (10 children)

So relieved to see a Starship Tech thread here. It's the only thread I check daily without fail. Thanks @[email protected]

load more comments (10 replies)
[–] [email protected] 9 points 2 years ago (1 children)

Steel sheathing going up on the tower at 10:40AM CDT on Starbase Live.

[–] threelonmusketeers 5 points 2 years ago (1 children)

Are they replacing sheathing that was damaged during the first integrated flight test, or are they adding sheathing to part of the tower that never previously had sheathing?

[–] [email protected] 6 points 2 years ago

New. They already took a few of the old panels off and then put them back.

load more comments (1 replies)
[–] [email protected] 6 points 2 years ago (2 children)

TheSpaceEngineer @mcrs987 has a thread on Twitter about hot-staging. A lot of people have been assuming that the lacy structure in his second picture will be the interstage that lets the exhaust out. He argues that it's unlikely, because (1) it doesn't look structurally sound, (2) it has been marked for scrap and no others have been seen, (3) the stringer pattern doesn't match the booster.

He advocates for another ring, which looks much more solid but has some reinforced holes. There have been two of them so far. He also says it resembles the hot-stage interstage of the Titan 2.

load more comments (2 replies)
[–] [email protected] 5 points 1 year ago* (last edited 1 year ago)
[–] [email protected] 5 points 1 year ago* (last edited 1 year ago)

Exciting stuff happening right now (See Starbase Live).

edit: And here’s the latest RGV Flyover video, which is the flyover from last week. Interesting content, but already heavily out of date.

[–] mars2033 5 points 2 years ago
[–] [email protected] 5 points 2 years ago* (last edited 2 years ago) (1 children)

New comment from /u/santacfan on Reddit:

Okay, I was 3 hours into watching the replay and counting trucks when I noticed Rover 2 chat has picked up the count again. So let’s go with their numbers instead of me going cross eyed trying to watch this for 12 hours.

Rover 2-

12:45pm- 144 trucks

13:15- 150 trucks

13:32- First pump truck leaves site. 151 trucks

13:43- Second pump truck leaves site. 152 trucks

14:25- 160 trucks

15:00- It’s the pour that never ends It goes on and on my friends Some trucks started pouring, not knowing how deep it was And they’ll continue pouring because 33 raptors tried to dig to china

15:01- 168 trucks

15:23- 3rd pump truck leaves. The concrete trucks though, they keep coming. 170

15:35- 4th back up pump truck leaves. Truck 171 pulls in

15:45- 174 trucks in. 5 trucks have left with their tag wheels down though indicating they are still full. So they might be done.

16:00- I’m calling it. The last truck was stopped and diverted down to the electrical trench.

174 trucks in. 6 trucks left loaded. So 168 trucks overall. Add in the 132 from the last big pour and we’re at even 300 truck loads.

Starbase Live-

12:23pm- First pump truck lowers

1:13pm- Second pump truck lowers

3:12pm- Third pump truck lowers

(This gets synced)

[–] [email protected] 6 points 2 years ago (8 children)

Hey all, I'm trying something new here -- I spoke with @[email protected] on Reddit and they said that while they'd like to continue posting here, they don't have the time -- but we do have permission to copy the data to Lemmy if we want.

I've set up a small automation on Val Town to automatically copy over their comments here. Let me know what you think -- if feedback is bad then I'll just disable it again.

load more comments (8 replies)
[–] [email protected] 5 points 2 years ago* (last edited 2 years ago) (3 children)

Looks like everyone is leaving the launch site in preparation for the static fire.

[Edit] Deputies at the road closure point.

load more comments (3 replies)
[–] mars2033 5 points 2 years ago* (last edited 2 years ago) (1 children)

~~Road closure tomorrow 8:00 am to 8:00 pm.~~

A new road closure is scheduled for tomorrow (June 21). Also 8:00 am to 8:00 pm.

load more comments (1 replies)
[–] threelonmusketeers 5 points 2 years ago

New possible road closures scheduled:

  • Primary Date: June 15, 12:00 pm to 12:00 am
  • Alternative Date: June 20, 8:00 am to 8:00 pm
  • Alternative Date: June 21, 8:00 am to 8:00 pm
[–] [email protected] 5 points 2 years ago

Christian Schiffer - schiffer-soft @schiffer_soft tweeted a diagram of Super Heavy and Starship. It's for something for @Senkrechtstart3; "Senkrechtstarter is the biggest german YouTube-Channel about spaceflight, rockets and newspace." They asked for corrections. Errors have been noted: "Why did you keep the CH4 header tank on the common dome?", and the shapes of the header tanks. But it looks like a good start.

[–] [email protected] 5 points 2 years ago* (last edited 2 years ago)

Detanking.

Road open. Done for the day.

[–] [email protected] 5 points 2 years ago

Venting around the front flaps on NerdleCam at about 16:39 CDT. I don't think I've ever seen that before.

[–] [email protected] 5 points 2 years ago

Also a reddit refugee here!

[–] [email protected] 5 points 2 years ago* (last edited 2 years ago)

They’re pouring the next (final?) layer under the OLM as we speak. NSF Live Feed.

Three pumps working in tandem, same as last time. Might take another 10 hours or so.

load more comments
view more: next ›