Be aware, that trusted Certificate Authority (CA) configuration applies to ALL certificates issued by CA. Thus, if one elects to trust "actalis" CA, then they trust ALL actalis CA users.

If the process of obtaining certificate was extremely simple, easy and did not involve identity verification steps, then bad actors can take advantage of this process and create identities that your client application will trust.

By itself the bad actor identity is of little concern to anybody, but it can have a significant impact if trusted identity is used in spam filtering, exploits of email client bugs or other hack attempts. Trusted users may be given higher access privilege at the client application level, which may be just enough for hacker to gain required access. For example, client application may be configured to trust all trusted senders with MIME attachments. An unknown trusted user sends malicious Application as file attachment. Accidental double click lunches the application without "are you sure?" prompt. Congratulations, machine is pwned.

The problem is easily mitigated by not importing root CA for easy CAs.

Personally I'd love to see more wider usage of S/MIME and/or PGP. What I take issue with actalis, is that they don't just sign your private key but you actually get the private key from them. It then depends on how much you trust the issuer. To me a key that wasn't always in your possession is basically compromised from the start.

(Although, I am also using protonmail's pgp, which arguably violates this rule as well, their transparency is more trustworthy to me. )

Yes, it exists.

S/MIME requires the receiving side to have its own certificate or, to be more correct, a private key represented by the certificate. The recipient's certificate needs to be known to the sender. The sender's certificate needs to be known by the recipient. That's why S/MIME is not used. It requires configuration on both sides, before it can be used.

Most people don’t know how to obtain certificate and configure email client with it or don’t bother to obtain certificate even if they know. The same problem exists if PGP is used, even if it is a bit different.

I will cover S/MIME and PGP because of similarities.

S/MIME or certificate based solution is supported by many clients, so it is easier on end user than PGP. S/MIME is part of the specification, that's why good email clients have built-in support. S/MIME problems are all around certificate management: how to obtain certificate (free or not), how to import certificate, how to trust certificate, how to import trusted root of the certificate.

It is easier to manage keys for free in PGP. PGP has no protocol level support in email clients, so it requires additional handling of underlying content. In effect PGP encrypted messages are injected into text message or sent as email attachments. In both cases PGP content has to be handled by external application (PGP encrypted text or image) or email client specific plug-in.

The technology is very old for both cases. It has not caught on due to friction of key management for both technologies. PGP has additional problem of content handling.

S/MIME is perfect if you want to communicate with family or friends as you can ensure everyone in your circle has their own private key. Even in this narrow case, I guarantee you will experience some friction to get this through.

Organizations can have it easier as they can issue certificates to their users. But then problem of trusted certificate authority comes into play, if they use their authority (every email client or OS running this email client has to import new Trusted Certificate Root, that is hard at ORG level and it gets worse when they have to tell their outside contacts how to work with them). If they use well known authority, they avoid Trusted Cert Root problem, but they have to pay for every user certificate.

So, you can see how there’s friction in S/MIME solution. IMO, S/MIME is a good solution, but friction made it unrealistic in major use cases.

At this point I recommend Delta Chat. I am not involved with it. I just like what I see. It is uses PGP technology. In the end it is looks like a modern P2P chat application with all the expected Chat functionality, but it is actually an email client sending PGP encrypted messages over email. Delta chat solved private key creation using built-in key generation. Public key exchange is solved via key exchange protocol. The problem of content attachment is solved by the application itself. Take a look at articles about it https://delta.chat/en/references

Signal vs Delta Chat. Signal metadata exposes your contacts and probably your time of contact. With Delta Chat you get the same level of meta data exposure: your contact and time of contact are in the open, because underlying protocol is email.

S/MIME protections. S/MIME keeps the same metadata in the open: contact and time of contact. That's because S/MIME protects the payload (message body), not the email protocol headers.

I might be a bit off on how PGP or S/MIME is passed around at SMTP headers level, but overall meaning shall stay the same.

Question 1: What's the point of using Actalis? Can't you generate your own certificate?

Question 2: Is there a way to get your email.server to automatically publish your public key?

Actalis sends you your private key. This means they have access to your private key, and theoretically could use it to sign and decrypt your emails. A more secure but somewhat more complex system would use a certificate signing request (CSR) instead. In that case, you are the only person who ever has your private key, so only you can sign or decrypt your email.

Also delete your expired certificate if you have one (for example after a year)

This is likely a bad mistake. Keep the old cert around.

There’s two possibilities:

The first possibility is that Actalis uses the same key pair for the new cert. This is not a great approach because it doesn’t defend against a leaked key or key overuse. After all, if the key can be trusted longer than a year, the first cert they issued should be valid for longer.

The second, and much worse possibility, is that renewing the cert gets a different private key. This can case data loss. Deleting the old identity means you lose the ability to decrypt any messages that were encrypted using that key! Even if your mail client stores the previously encrypted emails in decrypted form, you may receive a new email from a sender who does not yet have your new cert.

Great job and spot on! I know how good it feels to figure out stuff like this. I did this back in 2018. Was useful for sending encrypted emails to an organization with PKI setup. This was before they had other means through either O365 or a separate vault like sharing web app. Since there was no regular communication between this organization, I had no reason to keep it setup. I was employed by the organization and had an internal email.