This is an automated archive.
The original was posted on /r/wireguard by /u/One1pathOne1way on 2024-01-01 07:59:53+00:00.
Client Setup:
Device: Slate AX (GL-AXT1800)- Connected to M.E ISP router in repeater mode
Location: Middle East
Server Setup:
Device: GL-SFT1200 Opal
Location: United States
Internet Service: AT&T Fiber Optic, 1 Gig
Problem Description:
I have been using this Residential WireGuard VPN setup successfully for the past year. However, a few weeks ago, I started experiencing issues with connecting to my server in the US. We have confirmed that the server is not the problem.
The client shows as connected initially it indicating upload traffic but no download traffic.
Eventually, the connection fails shortly after about 15-20 seconds displaying a “client starting” message, followed by a complete loss of any connection.
Rebooting the ISP router multiple times is required before a stable connection is re-established. Can take many hours before it would work. Sometimes not
I’m unsure what could be causing these connection issues. Any guidance or suggestions would be greatly appreciated. I am ready to provide additional information as needed and will update this post with the most recent log file soon.