Hoping someone has an idea on this!
I’ve been making little Disney trinkets for my wife to hand out when we go to Disneyland, and feedback has been positive enough that I thought I’d try a little Etsy store to make some filament money.
Initially I added it into my base template in TinkerCAD but it kept coming out real bad, so I’ve been trying adding the text within Creality Print, and usually it looks pretty good but it can be wildly inconsistent.
The top two are from a batch of five where I set one up and then duplicated it. The middle two are from a batch of eleven, all duplicated from the first five that looked nice, and then the bottom two are that same batch of five that I tried printing a second time and it turned out way worse.
Any idea on why it varies so much and what I could do to resolve it?
The issue is probably that the text is on the bottom, as others have also pointed out. Take a look at this video, it explains your options pretty well: https://youtu.be/TH82TSjI67I
Checking this out now, thank you!
Also just found another one that has more concrete recommendations: https://youtu.be/iYCyU9paqdY
Here is an alternative Piped link(s):
https://piped.video/iYCyU9paqdY
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source; check me out at GitHub.
Awesome, thank you! Giving this a watch!
Here is an alternative Piped link(s):
https://piped.video/TH82TSjI67I
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source; check me out at GitHub.