3DPrinting

15746 readers

107 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

[email protected]

138

Partner broke the vacuum tube, so designed and printed replacements. (discuss.online)

submitted 10 months ago* (last edited 10 months ago) by [email protected] to c/[email protected]

33 comments fedilink hide all child comments

https://www.printables.com/model/759734-oreck-vacuum-tube-extension#preview

Replacement tubes are only about $15 but why spend that when I can just print them!

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 2 points 10 months ago* (last edited 10 months ago)

0.6mm Cooper clad Nozzle
0.3 Layer height
1.2 wall thickness
4.0 retraction
Use Adaptive Layers on

Filiment is Polymaker Pollyterra Charcoal Black

190c/50c

The rest comes down to tuning, print settings only account for a small part of the quality in my experience. So I put lots of time into making sure my esteps are spot on, my bed is level, I have trammed all the corners.