3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: [email protected] or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
From my experience contact failure is the most common cause of failures: 3A can go wrong. 28A is a bad day.
Similarly, a fuse won't protect at all against contact failures (the fuse doesn't care as the current doesn't rise) and active monitoring isn't found outside the industrial applications.
To provide some numbers on cables: A German company specifies their drag chain cables for 10 mio. cycles and they maintain a test lab to verify it and get the data required for the lifetime calculator. QC is excellent as well. In other words: Very unlikely the cable will be the issue. Assuming you see it as an issue there is always the option to use double insulated cables (no short or exposed conductors; designed to fail open). A TPE insulation rubbing through is also highly unlikely.
The contact points (connectors) are challenging. These conductors need to connect to another conductor, PCB or ceramic element so that it can withstand the vibration, acceleration, corrosion, etc. The higher the current is the lower the contact resistance needs to be the more it is susceptible to small changes.
Another problem with high currents is their electromagnetic radiation.