this post was submitted on 16 Nov 2023
0 points (50.0% liked)
Intel
24 readers
1 users here now
Rules
-
Be civil. Uncivil language, slurs, and insults will result in a ban. If you can't say something respectfully, don't say it at all.
-
No Unoriginal Sources, Referral links or Paywalled Articles.
-
All posts must be related to Intel or Intel products.
-
Give competitors' recommendations only where appropriate. If a user asks for Intel only (i.e. i5-12600k vs i5-13400?) recommendations, do not reply with non-Intel recommendations. Commenting on a build pic saying they should have gone AMD/Nvidia is also inappropriate, don't be rude. Let people enjoy things.
-
CPU Cooling problems: Just like 95C is normal for Ryzen, 100C is normal for Intel CPUs in many workloads. If you're worried about CPU temperatures, please look at reviews for the laptop or CPU cooler you're using.
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Hyper threading is off, Pcores are at 5.7ghz when 3 cores are loaded, 5.6ghz all core with p cores' 5 and 6 limited to 5.5ghz always. Ecores are at 4.5ghz always, ring frequency is at 4.9ghz. Cinebench r23 multicore power usage is at almost exactly 200w on the dot so nothing too bad power wise either.
Try 5.8/5.6/5.5 with OCTVB break points at 60C and 70C.
I may try 5.8 on the two pcores I used to have that at 20mv lower but I was clock stretching and getting mild instability, geekbench was also giving me about 100 less single core for reference so i am actually getting more performance with lower frequency currently. I am curious if it'll work now, tho I'll lyk. HT was also on then and it seems to significantly worsen stability at higher frequencies, so that may be another factor that is now solved. Hell pcores 5 and 6 may not even need to be capped at 5.5ghz anymore with it off.
Disabling HT usually gives another 100-200MHz at the same load line just because the core pulls less power and runs cooler.
Actually now that you mention it I wonder if the issues may be due to how hyperthreading interacts with an asymmetric all core frequency? I never managed to get that way of doing an all core stable until I turned hyperthreading off despite the cores being able to do it relatively fine when only 4 were underload but then again my llc is very droopy so they're also operating under a decently higher voltage under that scenario. Im sure it's part of the reason tho seeing the extra 20mv did seemingly nothing for stability whatsoever.
What are cinebench and passmark scores with this config?
what vcore in cinebench load?