this post was submitted on 21 Jun 2023
24 points (100.0% liked)

Aotearoa / New Zealand

1663 readers
5 users here now

Kia ora and welcome to !newzealand, a place to share and discuss anything about Aotearoa in general

Rules:

FAQ ~ NZ Community List ~ Join Matrix chatroom

 

Banner image by Bernard Spragg

Got an idea for next month's banner?

founded 2 years ago
MODERATORS
[email protected]
[email protected]
24
We've got an insulated house, heat it properly, ventilate it, but still see humidity levels of 70%+ in bed rooms. How to fix that? (lemmy.nz)
submitted 2 years ago by [email protected] to c/[email protected]
102 comments fedilink hide all child comments
 

We built a house 7 years ago and it's insulated and has double glazing. I've installed Home Assistant with temp sensors in the bed rooms and seeing 70%+ humidity levels. Temperature is always above 16c

We ventilate it, but still it's 70% in the bedrooms. WHO recommends 40-60%, so we're a bit worried.

Living room is around 55% during the day when we have the heat pump set at 21c.

As it's pretty humid outside I think it's almost impossible to get it lower, but are there any other tips? I don't want to run dehumidifiers. Would an HRV like system help?

you are viewing a single comment's thread
view the rest of the comments
[–] Seraph089 1 points 2 years ago (1 children)

I can't speak to NZ, but even a normal tank dehumidifier should have the option for a drain line. It'll usually be a hose fitting hidden above/behind where the tank sits, so you can run a line to whatever household drain is nearby. And if it doesn't already have a fitting, it's usually pretty simple to add one.

It can make placement a hassle since you need to be near a drain, but you'll barely need to touch it beyond setup. It's a huge upgrade from dumping the tank constantly.

[–] [email protected] 1 points 2 years ago

Yes, just bought one, and it has a drain outlet. Never knew that. Thanks!