this post was submitted on 19 Jun 2023
4 points (100.0% liked)

Network Engineering

656 readers
1 users here now

All things enterprise network engineering, design, and architecture.

Rules

  1. No low effort posts
  2. No home networking topics
  3. No memes

founded 2 years ago
MODERATORS
[email protected]
4
Managed switch works for Linux but not for u-boot? (beehaw.org)
submitted 2 years ago by [email protected] to c/[email protected]
6 comments fedilink hide all child comments
 

I had the weirdest of a problem. Two computers communicating with each other over ping and TFTP works. When I boot one of them into U-boot (a bootloader that supports TFTP boot) it can’t ping not load tftp of the other machine complaining on ARP timeouts.

I swapped with a dumb switch - all works. Everything else (machines, cables) are the same. The managed switch is a Cisco switch and I have a serial console to it, but I’m not familiar with managing those switches - what feature is potentially blocking u-boot's arp packets?

I’ve double checked with tcpdump - the other machine never seer u-boot's arp packets, but does when the same board is booted into Linux. I’ve also checked Cisco's monitor event-trace arp continuous and it didn’t print any packets but it did say link status went from up to down to back up when I rebooted.

Is there some sort of Mac filter on Cisco switches?

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 1 points 2 years ago

Should be no MAC filter unless it has been configured. Mind posting your switch configs?