3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I can't visualize this, can you make a diagram or screenie?
Basically this: https://imgur.com/a/VjUTVaq
The blue sections have no support material below them and are printing as bridges, but in the default behavior, PrusaSlicer just uses the single, global "bridging angle" setting to decide which way to print layers on top of these sections. The perimeters on these sections are printed correctly to make the shortest path across the gap, but the rest of the lines making up those bridge layers are printed to match the "bridging angle," which here means that two of the bridges are printed so they are supported only by those two perimeter bridges themselves.
Please ignore the details of the print itself, as I'm a little braindead today and this is a print that won't actually fold together correctly as designed. But the issue of bridges orienting poorly is more general than this particular design.
Can you try to change the geometry so that the different bridges are not consecutive in their corners ? It looks like the slicer is just trying to make one big bridge (in one direction) instead of 4 bridges in 4 directions.
Oh, you're totally right! I knew I was a little braindead today. Thanks so much! It absolutely already does the thing I'm asking for, it just got confused because the edges of the bridges were close enough that their anchors overlapped.
Bridging working normally: https://imgur.com/a/U7yqZU3
Thanks!
Interesting, it took me a while looking at your images to figure out why the original design didn’t work. The problem was that there was no solution that could avoid at least one extremely long bridge, and that bridge also forced the adjacent bridges to be “wrong” (though maybe if it printed the super long bridges first, it could’ve made the rest short).
I don’t have much to add besides being surprised the problem was more interesting than it first seemed…and I don’t accept that you were being an idiot because it want immediately obvious to me either. Or I am one too :)
The "idiot" part comes in where I encountered this problem, and didn't even stop to consider whether this might be specific to this model, or even try something as basic as turn the model on the print bed, which wouldn't have fixed the slicing, but would have told me my assumption about how the "bridging angle" setting worked was wrong. Instead, I leapt straight from "huh, this model sliced in a weird way" to "this basic slicer feature is designed in a bizarrely poor way and I'm the first one to ever notice," and posted about it on social media.
So I appreciate the sentiment, and I'll leave the post up as it I agree it's a mildly interesting and counterintuitive result, but I still maintain I acted kinda dumb. :)