this post was submitted on 02 Nov 2024
25 points (100.0% liked)

Astrophotography

1804 readers
1 users here now

Welcome to !astrophotography!

We are Lemmy's dedicated astrophotography community!

If you want to see or post pictures of space taken by amateurs using amateur level equipment, this is the place for you!

If you want to learn more about taking astro photos, check out our wiki or our discord!

Please read the rules before you post! It is your responsibility to be aware of current rules. Failure to be aware of current rules may result in your post being removed without warning at moderator discretion.

Rules




If your post is removed, try reposting with a different title. Don't hesitate to message the mods if you still have questions!


founded 1 year ago
MODERATORS
25
Would this even work? (sh.itjust.works)
submitted 3 weeks ago* (last edited 1 week ago) by einfach_orangensaft to c/[email protected]
 

Or would the tolerances needed in the hinged mirror make the whole thing unusable?

I was looking at modern "smart telescopes" recently and noticed some are sideways and wondered if that would be possible for a normal hobby Newtonian telescope.

Possible upsides:

  • no tripod needed for use
  • mirror is light so smaller motors can be used for movement

Possible downsides:

  • maybe mirror flatness?

EDIT/UPDATE: so i tryed it with a 75mm first surface mirror, it kinda worked, at least better than a normal mirror, but i wasnt able to get it as sharply focused as i like. I suspect the mirrior i use has micro ripples because its just 2mm thick and doesent look like its seen a polishen process....guess thats how far a budget of 25bucks gets ya

you are viewing a single comment's thread
view the rest of the comments
[–] laurenz 5 points 3 weeks ago (1 children)

Surface imperfections and play in the hinge aside, this would not work as you might imagine. This configuration (as illustrated), on a flat surface, would only completely image the zenith. Put it on a mount and it would image whatever is directly above the flat mirror. As soon as you move the hinged mirror, those light rays that eventually would lead to the camera sensor will only go flying into the tube walls. The light doesn't magically find its way to the parabolic mirror at any hinge position. A couple degrees around 45°, you would probably still get an image, but only at a 45° incline on the hinge would you get a complete image.

[–] [email protected] 1 points 3 weeks ago

If you rotate the hinge to angle X above the horizon, light coming in from an altitude angle of 2X (=zenith angle of 90deg-2X) will get reflected to into horizontal rays inside the tube.

So you don’t need a mount with adjustable altitude angle - the hinge accomplishes that.