this post was submitted on 12 Sep 2024
440 points (96.2% liked)

Technology

59958 readers
3831 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 25 points 3 months ago (2 children)

What I want from a battery soldering iron is a field-replaceable 18650 in the handle, not Webserial.

[–] [email protected] 17 points 3 months ago* (last edited 3 months ago) (1 children)

Build a 18650 battery bank and plug in a pinecil or ts100. A solder iron with a 18650 would be heavy and uncomfortable for soldering.

[–] [email protected] 5 points 3 months ago (2 children)

I would accept a bit of an awkward balance for being self-contained.

[–] [email protected] 6 points 3 months ago (1 children)

You'd want more than one cell. You'd be pulling 23amps from a 4.2v 18650 to give the same 100w at 20v power as you get from a top usbpd power supply.

There are 18650s that do 30 amps for short bursts, but it would get as hot as the iron and be empty in 5 min

[–] [email protected] 2 points 3 months ago (1 children)

I would not want multiple cells for reasons of ergonomics and convenience.

I probably don't need 100W for most field soldering. 60 is plenty, and temperature-controlled soldering irons usually don't need to pull high current continuously. It would need 60W for maybe 10 seconds when powered on, and when heating something large. The rest of the time, it takes relatively little power to keep the tip hot.

What I'm describing is, of course not the right tool for production soldering. It's for field work.

[–] [email protected] 2 points 3 months ago (1 children)

I've got a Ts80p which is a qc3 usbc soldering iron for that. It's crazy powerful for it's size and runs off a pretty small anker powerbank. You could slide that into your sleeve to go portable and one handed

[–] [email protected] 1 points 3 months ago

That's similar to the iFixit iron, as is the less expensive Pinecil.

Those are probably the best options currently available, but I want something more compact and self-contained.

[–] [email protected] 1 points 3 months ago (1 children)

If you need to not have a cable, the butane ones would be a better fit.

[–] [email protected] 1 points 3 months ago

Having used a butane iron before, I don't think it would. They don't have the temperature control modern digital irons can, and they're forbidden on flights.

[–] [email protected] 9 points 3 months ago (1 children)

I haven't done the math, how much runtime could you get out of a single 18650? They're pretty stout, but it seems like they'd be a bit underpowered.

Milwaukee 12v batteries are 3 cells (I think they're a little smaller than 18650), and you can run through a battery pretty quick (I believe they're 1.5AH). Though I don't know how efficient their heating design is.

[–] [email protected] 3 points 3 months ago (1 children)

Assuming the M12 CP1.5 battery pack, it's probably three 18650s. Specifically, it's probably three LG HB series 18650s, which handle high burst loads well, but hold only 1500 mAh. A single Sony VTC6 holds 2/3 the energy of one of those packs. Wait... why am I speculating? Youtubers tear down power tool battery packs on video all the time, and someone did that one. They're Samsung 15Ms, which are a little worse than HBs.

Anyway, short runtimes are fine for most field repairs, which is the whole point of something entirely self-contained. Spare batteries can extend it indefinitely, but a battery soldering iron is probably not what I'd pick for extended soldering sessions.

[–] [email protected] 1 points 3 months ago* (last edited 3 months ago)

Lol, I get it, I often start doing the math and realize "someone has already done this".

Cool, thanks for the link. I already knew the little 12v batteries suck (though they work fine for the intended purpose, like impact driver or work light). I kill them with any other tool.

Yea, I was just thinking is the runtime reasonable enough that having spare batteries is a sufficient approach. Like you said, long runtime isn't required, 15 minutes total runtime is probably more than enough (though that would be hell on battery life cycle).

Since I already have a slew of Milwaukee batteries, I'm trying to avoid things with 18650, except where form factor matters (like my flashlights). A Single Battery to Rule Them All (or at least most things).