bike wrench

I wouldn't use superglue. I would worry about it rubbing on the tube over time. Keep in mind, everything in there moves around a lot more than it seems at first. That was the selling point for old latex tubes; they cause less friction inside as the tire deforms at the rolling surface, (in addition to weight savings over butyl rubber tubes). The purpose in rim tape is to prevent the tube from contacting the inner edges of the spoke nipple holes as it flexes. Once the tube and tire are mounted and pressurized, it will hold everything in place, so long as the tape is the right width. Most factory wheels come with a plastic band and no adhesive because anything that collects junk in the rim is bad. I use these bands and a bit of talcum powder between the tube/tire/rim. This reduces the chance for pinch flats. Some tubes actually come in a talcum powder pouch for this reason as well. Generally, the cloth rim tape will stick to itself better than the rim.