luppano

joined 7 years ago
[–] [email protected] 4 points 7 months ago

@flashlight for those asking why I'm not on the pictures, working with the others, I was going back and forth from the stage with equipment, because the stage and backstage are 1,10m above the floor, and van, with no elevator or stairs nearby :D

 

3000 K BraTS10 and 4500 K DD MT21C lighting up the inside of a van while loading up the theater set and equipment.
The van was otherwise not lit at all on the inside. @flashlight #flashlight #theater

[–] [email protected] 4 points 7 months ago

@cobysev @GraniteM I have a french version from 1942 and modded it with a pretty low power, 2700~3000 K single LED drop-in, and more importantly a 18650 battery with integrated USB charging. I built a cheap 2D-18650 adapter by hollowing a piece of wood from the bottom and putting a flat-cut screw through the top to make contact. My grandpa use it and is happy with it. Way more runtime, bit more light, same temp.

[–] [email protected] 2 points 7 months ago (1 children)

@Curious_Canid I read somewhere that the last digit is the shape : 0 for cylindrical

[–] [email protected] 3 points 8 months ago (1 children)

@mp3 my little sister (21) just now: "I want that!"
Thanks, I now have an excuse to buy them :D
(And 519A-mod them before gifting them)

[–] [email protected] 13 points 8 months ago (4 children)

@mp3 how did you know I wear Crocs

 

I'm officially the flashlight guy of the family, according to this present 😭
#flashlight @flashlight

[–] [email protected] 4 points 8 months ago

@flashlight Left to right: TS10 3000 K, MT21C 6500 K DC-fixed, MT21C 519A 4500 K DD DC-fixed, TS10 4000 K.
If you click on the fedi logo you can see more pics.
Also dec 8 in Lyon, FR, is a historical festivity all about illuminations.

16
Je suis prêt pour le 8 décembre. (lltmstdn.s3.fr-par.scw.cloud)
 

Je suis prêt pour le 8 décembre.

#Lyon #FêteDesLumières #Flashlights @flashlight

[–] [email protected] 2 points 8 months ago (1 children)

@bpcomp that's a way to do it

[–] [email protected] 2 points 8 months ago (3 children)

@bpcomp I think a LEP defeats this purpose.

[–] [email protected] 0 points 9 months ago (1 children)

@SammysHP So it's one color at once only? No ramping? Only two brightness settings for each channel, + strobe? Still a cool light!

 

The biggest "moonlight" capable light you'll ever see https://youtu.be/LDiXNsWQzD0 @flashlight

 

Hi! Do you know where to find floody TIR optics to put in my 519A modded MT21C? (~1 inch diameter) @flashlight #Flashlight

 

Today I swapped the awful and greenish factory Cree XP-L HD V6 6500K of a Nitecore MT21C for a Nichia 519A 4500K (MCPCB swap). I may try to install a floodier TIR optic. Click the fedi logo for more! #Flashlight @flashlight

 

Two vise clamps and lots of brute force, I finally disassembled the head of a MT21C, which is a great light with shitty emitter and beam. What emitter should I swap for ? 3.45mm square, 2.79 Vf typical, 3 amps. I like 4000 k and high CRI. @flashlight

 

3000k TS10 to the rescue! Nobody planned any lighting for the sculpture ( by @Syl) at the entrance of the festival. It is fixed for a few hours. @flashlight

 

I think I found a faithful representation of @flashlight and r/Flashlight : https://www.youtube.com/watch?v=4ZK8Z8hulFg

 

NileRed made a video a while ago about *what* is the metallic smell. Like the one of copper flashlights @flashlight
https://youtube.com/watch?v=BqLH-nTZEOc&si=Fepz2Kah6-rJA-eT

 

[OC] Hi ! I live near Lyon, France and this is a map from only my GPS traces from the last 4 years. #map @dataisbeautiful

 

Comparing the 3D beam shapes (and not a side projection on a wall) of the 1 LED + SMO Nitecore MT21C vs the 3 LED + TIR optics of Wurkkos TS10s (4000 K and 3000 K). Using soapy water in a white tub. @flashlight #flashlight

view more: next ›