[-] [email protected] 10 points 9 months ago* (last edited 9 months ago)

Lol, yeah f*ck r_ddit - I'd much rather see this community grow in the fediverse!

convection or conduction heating?

I'd call it a hybrid. Given the placement of the oven and the heater, it feels like it does have a small convection heater, but it benefits greatly from hybrid heating once it heats up.

on-demand or session?

I mean I feel like without a dosing capsule you can probably treat it almost like an on-demand device, HOWEVER it's not. I'm a session guy and I'd treat this more like a session device

i need to know these things for when my milaana vape dies. i feel like the button is already getting a little sketchy. meh.

Having handled an original Milaana (and zion), this is not a Milaana. If you want to directly replace the Milaana, look into any one of the sub-ohm 510 attachment vaporizers on the market and pair it with a decent ecig battery (with subohm compatibility)

Personally, I feel this device is best suited to someone who has a POTV One and looking for an upgrade OR the average ent who has $150 to blow on a vaporizer to "test the waters" and looking for a good entry-level device which is a solid hitter. The oven size is almost too big for me, but I bet it's perfect for the first-time vaporent buying their first device trying to make the switch from smoking.

But yeah, I wouldn't put this in the same ballpark as the Milaana at all haha - that's a very different vaporizer

28
submitted 9 months ago* (last edited 9 months ago) by [email protected] to c/[email protected]

So I've handled quite a few vaporizers in my time (lost count after a few dozen lol).

I was excited to get this device for a few reasons including a few new aftermarket accessories which will be on the market soon.

I've only handled the device a few times so these are initial impressions:

Pros:

  • Nice heft in the hands - feels solid enough construction for the price. But that's expected from the manufacturer.

  • Flat base - unlike my HealthyRips Rogue which has rounded sides, this device has a flat base so it sits flush on a surface making it more stable (especially with the watertool attached)

  • Massive oven - this oven is larger than the Rogue (which is a decent size already)- it's just a smidge smaller in diameter than the S&B Dosing Capsules (maybe two or three millimeters smaller)

  • Removable 18650 battery - FINALLY!! Yes these batteries are not quite as reliable as the older LiPoly batteries they had been using in older models, but finally we have the ability to swap out batteries when you wear out a battery after 100 hours of use - it's also nice to easily swap out batteries with a precharged battery before heading out. Big win for sustainability over sealed-in batteries

  • USB-C charging - always a win. Now I can use one charger to charge both phone, and vaporizer, as well as any spare 18650 batteries I have with me (no need to lug around my Nitecore D2 on short road trips)

  • Love the upgraded slide mouthpiece. The older pop-in design used by the Rogue felt satisfying, but it was not durable and always wore-out on customers after heavy use. This new slide-in mouthpiece makes the device far more durable - I also like the added magnets for things to snap together

  • Glass mouthpiece - always a nice touch. Plus you can use other tools which slide into the same mouthpiece - including my old HealthyRips "water tool" inline vertical waterpipe which is pretty awesome for vaporbonging on vacation!

  • Fast enough heatup - from a cold start to 350F it took about 45 seconds. Seems like the temperature sensor is measuring a different spot, not exactly on the heater itself - possibly in the air chamber above the heater.. Just based on how I've seen it heatup compared to other devices made by the same manufacturer (including the rogue)

Cons:

  • No pass-through charging. Not entirely unsurprising, but you cannot charge the device while using it. The workaround is simple: buy a few spare batteries and recharge them

  • Short Auto-off timer - feels like the unit always shuts off too fast. I wish it had a 7.5 or 10 minute timer - or the ability to disable it (maybe there is and I haven't RTFM to find out haha)

  • Minimum temperature of 320F - that's a bit high for me personally. I wish they had set it to a minimum of 300F

  • Draw restriction - feels a bit restricted which isn't terrible (and likely intentional), but I would have preferred a bit more

As other's have said, it's an upgraded HealthyRips Rogue and that's a fair assessment - it has some good upgrades (especially the swappable 18650 battery slot) which makes it a fair more durable and sustainable device.

Now to get back to some more R&D so I can finalize some new widgets!

--

[-] [email protected] 27 points 10 months ago* (last edited 10 months ago)

Neither, I prefer dry vaporizing to combusting these days - it's healthier, tastes better, and I can customize what the affects feel like (different temps cook out different medical benefits from the plant)

But I still enjoy combusting socially when someone is passing something around, but I absolutely prefer flavor chasing with a dry vape

0
submitted 10 months ago* (last edited 10 months ago) by [email protected] to c/[email protected]

I was scooping up a new Vapcap-B for a friend as a birthday gift (three days before they announced a BOGO deal on Vapcap-B's!) so I decided to shop around for upgrades for my 2020-M.

I still like the midbody design from my 2020, and the fact that this M was personally gifted to me by George (we met at a CHAMPS show in 2020, but know each other as we shared banking notes when founding our businesses in the same year). But I needed a new captive cap and really like the look of the new Titanium Helix tip so I figured why not upgrade.

REALLY liking this design, I think I like it more than my original first-gen Omnivap.

Before: https://imgur.com/nzgpmVI

After: https://imgur.com/MT98auk / https://imgur.com/Tpovwfg

8
submitted 10 months ago* (last edited 10 months ago) by [email protected] to c/[email protected]

As I'm sure many of you can imagine, I have a lot of devices in my collection (working and not working, as I sometimes need to test-fit prototypes of custom parts or mods). Heck, a few of my collection have long since been discontinued by this point (Indica vaporizer, Pax1, Grasshopper, VapeXhale Cloud+, Mistvape, etc)

Anyway, I'm looking to grab another portable. But I can't keep up with all the new devices. I'm looking more at the popular budget to mid-priced devices. Thinking about grabbing an Xlux Roffu, although I'm open to suggestions.

Yes, I know S&B is working on releasing a new portable vaporizer in the near future but I'm not waiting for that to drop. (I already have both a crafty and a mighty in my collection lol).

12
submitted 11 months ago by [email protected] to c/[email protected]

I used to spend a lot of time answering newbie questions in the r/vaporents section of reddit, but I'm no longer using that app so I've been trying to fill that void over here on lemmy and elsewhere.

I'm even back on FuckCombustion.com occasionally

I mean there actually seems to be more activity on !trees (@trees for kbin users), but I'm looking more at dry vaporizing specific communities

[-] [email protected] 8 points 11 months ago

Coming from dry herbal vaporizing, no. I have found some concentrates are more "Full spectrum" than other concentrates.

A lot of it comes down to how it's extracted from the plant. Temperature and pressure can alter what gets extracted into the concentrate.

Personally I equate most concentrates to junk food - yes they taste great, but they don't give you the full nutritional content of a healthy salad.

Same with dry herbal vaporizing - it lets you extract everything you want from the plant, directly. Yes it's not as concentrated and for a dabber they probably won't get much enjoyment from dry vaporizing since it's a slower extraction. But after having "dabbled" with a bunch of different concentrates myself over the years, I'm perfectly content with dry herbal vaporizing.

Just my $0.02

[-] [email protected] 10 points 11 months ago

I left vaporents back during the boycott. Now I'm here to dispense knowledge for novice users.

I actually see a lot of vaporizer posts in the /m/trees group which makes me happy haha

But yeah I'd love to see more ents on vaporents. Maybe some day!

[-] [email protected] 9 points 11 months ago

Since the herb is now decarb'd it can be properly ingested by the body.

I've done a few things over the years with it:

  • Firecrackers - grab some peanutbutter and crackers. Load up a cracker with PB (and jelly if desired), then sprinkle on some ABV and enjoy

  • Yogurt - mix in some ABV with yogurt to conceal the flavor. Easy to eat a lot of ABV this way hahaha.

  • Chocolate milkshake - delicious and blends nicely with the ABV flavor.

  • Sous-vide budder - I use a sous vide heated to 180F. I put 1/2 a cup of ABV per one four-ounce stick of budder, with a quarter cup of water and some coconut oil into a bag and put that in the sous vide for four hours. Then I strain the contents using a french-press and pour into silicone molds which I pop into the freezer. After an hour I crack open the molds and pour out the black "water" (which contains all the grit and sediment from the ABV) - this lets me have nice fresh sticks of budder with no ice or black ABV sediment. I then bake edibles with the budder (NOTE, I always bake edibles at 325F and extend baking time to ensure I don't cook off too many active compounds from the ABV). I also like to make Rice-Krispy treats since they require a lot of budder.

Pro tip: Hate the flavor of your ABV? You can "water-cure" it to eliminate that flavor. Put some ABV in a cheesecloth and wrap it up, then flush with COLD Water until water runs clear through cheesecloth.

[-] [email protected] 6 points 11 months ago

Look into dry herbal vaporizing instead of using concentrates for more consistent results. Different temperatures cook out different active compounds from the flower.

This lets you select your favorite temperatures depending on time of day or mood/strain. For example if you only have indica-leaning hybrids but want the uplifting euphoric affects of sativa, you can vape the hybrid at lower temps to extract the sativa side. You won't get as much vapor but it will only release that side of the herb.

If you desire sleep, I'd be focused on higher temp vaporizing with a CBD or indica dominate strain.

[-] [email protected] 14 points 11 months ago

So when dry vaporizing we are basically doing the same thing...... except much hotter - we're talking closer to 150c and hotter to release the vapor from the herb.

In fact, we use different temperatures (between 150c and 220C) to release different medical benefits from the flower (low temps around 150C for more uplifting cerebral effects, and high temps over 200C for more pain relief and sedation).

Recently picked up a 1g preroll of cannabis from the dispensary and left it in my car for a week (ambient temps around 41°). When I went to smoke it, it smelled the same and looked the same (was in a sealed plastic container) but it had no effect whatsoever. Does THC degrade at high ambient temps?

Yes something will start to degrade at 40c, but what you experienced is not that......

Fun story for you:

I had a similar experience in Las Vegas. While attending a CHAMPS trade show (420 industry b2b event) in Las Vegas, the different recreational dispensaries were giving away free pre-rolls and large discounts to any customer who had a CHAMPS badge from the show. Since I don't combust (dry vaporizing only), I took the free pre-roll from one dispensary and emptied the shake. Then I cooked it in my dry herbal vaporizer.

Except I got literally zero vapor!!!! I honestly thought my vaporizer was broken. Until I reloaded the device with some fresh top-shelf flower and boom, I got a ton of vapor. As it turns out, the dispensary I visited was extracting all concentrate from the herb to sell wax concentrate to customers. The leftover shake from that process was put into pre-rolls and sold as cheap 1g smokes despite the fact that they contained essentially zero active compounds.

To the average smoker, its cheap and it produces smoke (plus the combustion creates a toxic cocktail of carcinogenics and carbon monoxide can yield temporary euphoric and sedative affects which fools many ents). But with my dry herbal vaporizer I immediately noticed the problem.

So to answer your question, no I highly doubt that leaving a pre-roll in a car at 40c would cook off ALL active compounds. Maybe some low-temp terps, but not everything.

Does that dispensary also sell concentrates? It's very likely they are trying to double-dip by selling both the concentrates and the trash shake as pre-rolls so they can increase profits. And I'm sure the local government doesn't care that they're misleading customers - because they're still earning tax revenue and all that jazz.

If you don't believe me, it would be really easy to test with a dry herbal vaporizer - put some of that pre-roll into a dry vaporizer set to 200C and start cooking - do you see much vapor production? Or does the device produce practically zero vapor? That'd be because there are no active compounds left to extract at those temps.

Just my $0.02

[-] [email protected] 5 points 11 months ago

I've done the same, but I will post a reply as though I'm answering for any lurkers that might come visit this sub at some point.

But I do agree with you - we should just make our own content. Maybe as this community takes off, we can disable that bot all together

[-] [email protected] 17 points 1 year ago* (last edited 1 year ago)

Around 15 years ago, I learned about dry vaporizing, but I never gave it a try. A year later, I bought a cheap knockoff vaporizer from a local smoke shop, and it turned out to be terrible. Funny enough, I recently dug it out and found it still sucks (laughs).

Then, about a decade ago, a friend introduced me to the Pax1 vaporizer, and I was blown away. It was a game changer—a portable, handheld device for dry herb vaporization. From that point on, I was hooked. I started with a Davinci Ascent, created aftermarket accessories for it, and eventually founded Delta3DStudios. Now I get to play around with various dry herb vaporizers and come up with ways to improve them or make them more user-friendly.

Transitioning from smoking to dry vaporizing can be challenging for some. Many heavy smokers claim that dry herb vaporizing doesn't give them the same "hit." The truth is, their bodies are used to the effects of a toxic mix of carcinogens and carbon monoxide. Fortunately, I had an easier transition. My partner didn't allow smoking indoors, but they let me vaporize indoors during one cold winter. I quickly adapted to the vaporizer, and it had a positive impact on my health, which I hadn't anticipated. First, my sense of smell returned with a vengeance. I didn't realize how much smoking had affected it. Additionally, as someone who frequents the gym, I noticed an increase in endurance and lung capacity. My lungs felt lighter. This is just my personal experience, but the difference between smoking and vaporizing was incredible.

At this point, I've handled countless vaporizers, and I've lost count of how many devices (working, dead, broken, etc.) I have in my collection (which I use to test new accessories for the market, haha).

Here are some tips from one enthusiast to another:

  • Different temperatures extract different active compounds from the herb. Low temperatures work best for sativa strains, while higher temperatures are better for indica and CBD strains. You can vape a hybrid strain at low temperatures to extract the sativa side and at high temperatures to extract both sides. You can also start at a low temperature for one session and then increase the temperature for the next session.

  • Every device performs differently. Some are stealthier, some heat up faster, some produce larger clouds, some provide tastier vapor, and some are easier to clean, among other differences. There is no such thing as a "perfect" device for everyone in every situation. I use different devices depending on my mood, location, and whether I have guests. Some of my favorite butane-powered devices are not meant for sharing because they're prone to combustion, which affects the flavor of subsequent sessions.

  • It's not recommended to reheat the herb at the same temperature, but you can have one session at a lower temperature and then increase the temperature by 20 degrees Fahrenheit or more for each subsequent session.

  • Don't jump straight to the maximum temperature, especially with portable vaporizers. Enjoy the journey. Start at a low temperature, around 300 degrees Fahrenheit, and gradually increase it by 10-20 degrees every few minutes.

  • Temperature sensors usually monitor the heater's temperature, not the core temperature of your herb. If you take hard or fast draws with many devices, you might cool down the heater faster than it can recover the temperature. Depending on the device, try slowing down your draw. I recommend a draw speed of 15-20 seconds to slowly fill your lungs. Of course, high-powered desktop devices may allow for harder draws, but I'm speaking generally.

  • Many portable vaporizers have underpowered heaters due to size constraints and power limitations imposed by lithium power cells. It takes some time for a portable device to reach optimal extraction temperatures. Therefore, it's especially important to start at a low temperature, like 300 degrees Fahrenheit, for the first 1-2 minutes before increasing it to your desired level. This helps the device "preheat," allowing it to adjust the temperature faster when you start taking longer draws at higher temperatures.

  • With regular use, people often build up a tolerance to their usual device. Load sizes, temperature settings, draw patterns, and more become habitual. By switching devices once or twice a year, you can "reset" these tolerances. It doesn't have to be an upgrade to a more powerful device. Sometimes, switching to a weaker, budget-friendly device can help reset your body's tolerance. I do it often to avoid overmedicating. So, don't throw away your old devices—cycle through them from time to time!

  • Vaporbonging is another fun way to enjoy vaporizers when pairing them with glass. However, keep two things in mind: Firstly, you don't need excessive filtration. Conditioning the vapor with moisture is enough; massive percolators and multiple water chambers can strip the vapor of its flavor (which can be useful when vaping unpleasant-tasting hash, for example). Secondly, while cold glass and ice may be enjoyable for smoking, they cause vapor particles to condense into larger particles, resulting in more throat irritation. Therefore, when vaporbonging, use warm or hot water in the glass pipe instead of cold water and ice.

I could talk endlessly about this topic—I spend way too much time experimenting with and studying these devices and the wonders of this plant. Feel free to ask anything you'd like. I no longer contribute to Reddit, so I'm happy to share my knowledge here!

8
submitted 1 year ago by [email protected] to c/[email protected]

This community is too quiet! Let's get some chatter going!

I've been dreaming up a 3D printed stem for the Vapcap..... but I want to do a few different things that wouldn't be possible with traditional manufacturing, like hollow sections for holding safely without burning your fingers, multiple mini air-intake holes so I can adjust airflow simply by selecting how many air holes my thumb and index finger cover, etc.

I was thinking about something crazy like 3D printing pure silver or gold for that extra bling factor.

I'd love to hear some other thoughts or wishlist ideas from other ents. If you could design your ultimate dream stem, what design elements would you love to see incorporated?

I'm thinking about my classic knurl texture - I gotta add that somewhere to the design! lol

[-] [email protected] 9 points 1 year ago

I make budder using a sous vide with mine:

  • 1/2 cup ABV
  • One 4-ounce stick of butter (unsalted)
  • 1/4 cup of water
  • 1 tablespoon coconut oil

Seal in a bag. Set SousVide to 180F and submerge bag for 4 hours (depending on how you seal the bag - you might need to do a lower temp for longer)

I then pour the contents into a french press and strain into silicone butter molds. I toss that into the freezer to set up. After about an hour I crack open the silicone molds - the butter has solidified, but all the sediment and water settles to the bottom. So I gently crack open the molds and pour out this black-ish water (alternatively you can let it fully freeze as an ice cube at the bottom... then later pop it off as you thaw out the budder - either way works).

When baking with budder, I always stay at 325F and extend baking times by 25% to ensure the active compounds aren't cooked out.

Although one of my favorites is rice krispy treats since they use a lot of budder. Careful though - they can be extremely sedative.

[-] [email protected] 8 points 1 year ago

I work in the industry and have owned/handled countless vaporizers (lost count around four dozen). Unlike oil vapes, dry herbal vaporizers perform very differently.

Dry herbal vapes come in many shapes and sizes - from stealthy portables to massive desktop units. Some are stealthy, some taste better, some cloud chase faster, some have better temperature regulation, etc.

The thing to understand is that for most ents who use dry vaporizers, we have multiple in our collection because there is no "perfect" device for every scenario. PLUS it's best to switch up devices a few times a year to avoid building up a "tolerance" to the device (it's mostly psychological due to the habitual use of the device - load sizes, temps used, draw patterns used, etc).

My advice would be to start with a good entry level budget-friendly device. Get your "bearings" on how dry vaporizers perform so you can then make a more educated decision when buying a second device (maybe you want one with a larger oven, or faster extraction, etc) - it's a lot easier searching for comparison reviews where people say X device is different from Y device in such ways.

Like feel free to ask me about a bunch of different devices, I'll be happy to give you the pros and cons to that device (assuming I've handled it).

For a novice user, I have three suggestions:

  • Xmax V3 Pro - great entry level device, removable 18650 battery (easy to swap out batteries and keep vaping), two cooking modes "session" (my favorite for the device) and "on demand" (less efficient, but pushes heater to heat up faster for a quicker "puff")

  • POTV One Vaporizer (HealthyRips Fury Edge device with a few revisions for the specific vendor). I'd say it cooks a bit more efficiently overall than the Xmax v3 pro, but non removable battery is bad thing to some people

  • Dynavap Vapcap-B - a great budget friendly device that's awesome when you learn how to use it. It's an analog device with a cult-like following these days for good reason - it performs unlike most other devices on the market lol. They're a fun device for off-the-grid use because it can be heated with so many different methods (electric induction coil, cigar torch, campfire coals, tea candle, even a magnifier and sunlight!). I think a Vapcap belongs in everyone's collection (I even have a first-gen Omnivap from Dynavap which is made out of Titanium making it more indestructible lol)

[-] [email protected] 12 points 1 year ago

Well, I discovered dry herbal vaporizers about a decade ago. Bought my first started making accessories for it..... and the rest was history.

These days I have literally countless dry herbal vaporizers in my collection. Aside from edibles, dry vaping is the only way I do it. In order to avoid building up a "tolerance" to the device, I make it a habit to cycle through devices once or twice a year switching to something else (sometimes more powerful cloud chasers, other times very discrete under-powered handheld devices).

I truly enjoy switching vaporizers because it allows me to reset my habits (load sizes, temperatures used, draw rate, etc). Sometimes I can cut back to less than a gram a month (once or twice a day medicating) and other times I can 'burn' through a lot more lol.

When it comes to the style of dry vaporizer, sometimes I enjoy direct draw, or I enjoy vaporbonging with a waterpipe. For social gatherings, I pull out my Arizer XQ2 and start filling balloons for friends so everyone gets their own bag of vapor to enjoy at their own pace.

5
submitted 1 year ago by [email protected] to c/[email protected]

Like the old vaporents, to help novice users answer basic questions without cluttering up the main community with mundane questions.

I'll be happy to contribute and help novice users as I did with r/Vaporents

view more: next ›

Delta3DStudios

joined 1 year ago