[-] [email protected] 1 points 1 day ago

Dann weißt du da mehr als ich. Ich weiß nur dass es das gibt und es verwendet wird. Wie ein Aufbau in der Praxis aussieht, weiß ich nicht.

[-] [email protected] 18 points 2 days ago

Machen auch Geschäfte schon so. Du verteilst ein paar Tracker auf dem Gelände. Die mobilen Geräte senden in regelmäßigen Abständen eine einzigartige ID aus.

Die Tracker auf dem Gelände empfangen diese IDs und triangulieren den Standort jedes einzelnen Senders.

[-] [email protected] 1 points 3 days ago

Try aliexpress. Most of the time they have an adapter so you can use a standard network card in a MacBook

[-] [email protected] 1 points 3 days ago* (last edited 3 days ago)

Ging doch hier um EC, oder?

Aber auch bei Visa/etc. wäre es ja aus deinem Link mit etwa 1-2% ohne sockelbetrag (wenn ich das richtig verstanden hab) sogar günstiger weil es egal wäre ob es 16 oder eine Transaktion wäre.

[-] [email protected] 4 points 3 days ago

To be honest, every part of critical infrastructure should be critically examined for Security risks. Independent of who or where is was made.

[-] [email protected] 3 points 3 days ago

Die 20 Cent pro Transaktion sind auch sehr hoch. Normal sollte es unter 10 Cent sein. Wir reden hier als über weniger als 1,60€…

[-] [email protected] 4 points 3 days ago

Warum wechseln sie dann nicht den Anbieter? Es gibt genügend davon, alleine nach kurzem googeln habe ich schon mehrere gefunden die weeeeeit unter den 20cent pro Transaktion liegen die hier in der Geschichte genannt werden. Normal sind da wohl um die 7 Cent + 0,25% des Umsatzes. Bei einem 5€ Bier sind das also grade 8 Cent.

[-] [email protected] 4 points 3 days ago* (last edited 3 days ago)

Gibt auch milchpackungen wo es sich nicht verdreht, sondern es immer fix auf einer Seite bleibt. Vielleicht ist es Zeit eine andere Marke zu nehmen wenn es dich so sehr aufregt?

[-] [email protected] 1 points 3 days ago

Yes, pizza and burgers and stuff, sure. But usually not for donuts.

[-] [email protected] 3 points 4 days ago

Start with more basic troubleshooting:

Mark out 100mm length on the filament, tell the printer to extrude 100mm and see if it did. If not, remove the hotend and try again. If it did now, you have a problem with your hotend.

If it worked both times, your slicer might be setup wrong.

[-] [email protected] 7 points 4 days ago

Where do you take that number from? 1MWh/mo seems quite high. Also considering that the stored energy will only be used when solar or wind are low, the battery will never be used to supply 100% of the electricity.

So it will support many more homes.

[-] [email protected] 5 points 4 days ago

Was hast du bitte für ein monströses Eisfach dass du da einfach 80kg Käse reinschieben könntest?

view more: next ›

B0rax

joined 1 year ago