Homelab

380 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

[email protected]

The new EPCY 9004 CPU's look like a great option for a low(ish) power build. (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

2 comments fedilink hide all child comments

I'm running 2 Proxmox nodes in an HA Cluster with dual E5-2697A V4's and while it works great it's making my office rather warm.

The 9124 isn't cheap, however, it has a 200W TDP and has a higher benchmark with just 1 of them compared to my dual Xeon setup. It's $1150 though which is kind of sucky, however, it should kick out much less heat I'd think?

Is anyone using this CPU or the other 2 I listed below? They are $1600-$2000 though.

Supermicro H13SSL-N Motherboard - https://www.supermicro.com/en/products/motherboard/h13ssl-n

AMD EPYC 9124 - https://www.amd.com/en/products/cpu/amd-epyc-9124

AMD EPYC 9224 - https://www.amd.com/en/products/cpu/amd-epyc-9224

AMD EPCY 9254 - https://www.amd.com/en/products/cpu/amd-epyc-9254

ETA: The Supermicro H13SSL-NT is the same as the H13SSL-N except that it has 10Gbe, however, it's $120 more expensive. I don't need it as I use SFP+ with fiber everywhere at the moment.

top 2 comments

sorted by: hot top controversial new old

[–] [email protected] 2 points 11 months ago

What are you doing in your "homelab" that needs a $2000 CPU? If you don't need the PCIe lanes or memory bandwidth, get a Ryzen for 1/8th the cost and a third of the platform power requirement. You'll get better single core IPC anyway, which is still king.

[–] [email protected] 1 points 11 months ago

actually i’d be looking at 8004 which should hit retail very soon. Should be even more efficient. Either way, both will outperform any v4 system. Don’t worry too much about the 200W, i’m sure you idle at 100W each node now. Not only does Epyc idle much lower, i doubt you’ll be hitting 100% cpu usage. No experience with 9004 yet, but i love 7003.