this post was submitted on 19 Nov 2023
1 points (100.0% liked)

Intel

24 readers
1 users here now

Rules

founded 11 months ago
MODERATORS
 

so i have a z590 wifi gundam edition i just bought it, and it says it supports 11th gen cpu’s so i bought a i9-11900k cpu to use but it shows no display. it turns on and the fans work and everything but it shows no display. i updated the bios to the latest version(1801). It only shows display when i use the graphics the cpu comes in thats it. nothing wrong with the gpu because i used it on another pc and it turned on fine. if you can help me with this problem i would appreciate it.

top 3 comments
sorted by: hot top controversial new old
[–] [email protected] 1 points 10 months ago

Is the GPU power plugged in correctly?

[–] [email protected] 1 points 10 months ago

What GPU? Does it show up (properly or otherwise) in device manager?

If you initially boot with a display connected to the iGPU, does swapping the cable over to the GPU result in any display output?

[–] [email protected] 1 points 10 months ago

Most of the time it's your bios that needs an update. Problem is that you need a mobo which you can flash with a flash button or use an 10th gen to flash bios to accept 11th gen.

I had the same with 13 th gen on Z690 ended up with buying Z790 because couldn't flash