this post was submitted on 12 Nov 2023
0 points (50.0% liked)

Framework

68 readers
1 users here now

Discussion around the Framework mission of building products that last longer by making them upgradeable, customizable, and repairable. Consumer electronics can be better for you and for the environment.

founded 11 months ago
MODERATORS
 

Hey guys, I’ve got a batch 9 7640u DIY order

I’m a computer engineering student, hoping to be able to run a bunch of containers with an embedded hardware/firmware career path. CAD prices are roughly as follows. I can probably deal with 32GB but I do tend to like having 10 datasheets and a bunch of tabs open.

32GB CL46 - $137 32GB CL40 - $165 64GB CL46 - $237 64GB CL40 - $290

Where do you guys see the best value here?

top 5 comments
sorted by: hot top controversial new old
[–] [email protected] 1 points 10 months ago

64gb CL40 is 255CAD on amazon.

I'll be using my Framework for VMs mostly. 100% certain I won't be gaming with it. I'll be saving a few box going with the CL46. The bottleneck will never be the RAM in my use-case.

[–] [email protected] 1 points 10 months ago

Even for a bunch of tabs and programs opened, you shouldn't run into problems with 32GB. Except if you really need it of course (you would probably know this already though, if it was limiting you).

Do you intend to game a bit on it? Because if so, I would recommend the CL40 RAM. If not, you probably are fine with CL46 because it is cheaper.

If you aren't sure about the capacity you could look up guides for your programs and use cases.

[–] [email protected] 1 points 10 months ago

I suggest to buy a single 32 like I will, and test if you'll ever max them. But seeing no virtualizazion 32 are usually enough

[–] [email protected] 1 points 10 months ago

Sorry to hijack, but I just got word my AMD Framework 13 is shipping out as well. Batch 5, Ryzen 7 7840U.

Is this kit decent?

CT2K16G56C46S5

It’s a Crucial ddr5 kit at 5600mhz. 2 x 16gb. The only kit they offer at that speed and size. I’ve always been partial to Crucial memory.

[–] [email protected] 1 points 10 months ago

Since video is also using RAM lower latency CL40 is a good way to go. As to amount - The best way, especially if you're already doing some of this work, is to look at your current system usage while you're working. If you see you're only using 15 or 20GB currently - 32GB is going to do you well for a long time (absent a major change in your workload). If you notice you're already using 25 or 30GB - Probably worth going to 64GB. Take note of how much swap is in use also, not RAM alone.

In my case I do dev under Linux/IntelliJ and have seen my actual usage, with some VMware Workstation VMs also going, hit ~40GB. On some occasions it can go much higher running certain internal data processing tools. I'll be going with at least 64GB on FW16, 96GB if I feel like spending the extra money closer to shipping.