this post was submitted on 13 Aug 2023

57 points (95.2% liked)

homelab

6386 readers

3 users here now

founded 4 years ago

MODERATORS

[email protected]

Here is my current homelab setup (now show me yours) (lemmy.zip)

submitted 1 year ago by [email protected] to c/[email protected]

15 comments fedilink hide all child comments

I wish lemmy would allow for bigger images.

My setup:

VPS: Wireguard and ngnix proxy
Nanopi: Friendlywrt for the firewall
Dell precision tower 3620: proxmox with lxc containers running caddy and WordPress. I also have a VM running docker which runs some services, truenas for storage and a Linux mint VM for gaming, machine learning and jellyfin in podman. The machine has a 590 and a standard power supply. I had to cut off some of the housing in the case and on the GPU to make it fit.
Beelink mini PC: It also runs proxmox and has my VM endpoint for wireguard with another ngnix proxy. It also runs a VM with docker for some other services
Raspberry pi 3: i2p for fun

all 17 comments

sorted by: hot top controversial new old

[–] [email protected] 8 points 1 year ago* (last edited 1 year ago)

How it started.

How it's going.

Note: The last Pic is when I installed my 10gb switch, but I was still waiting for my DAC cables to arrive. All my servers are using 10gb at this point. Also, I should note that the cable management isn't great... I'm in the process of moving to mikrotik switches. So I have a few misc cables that are out of place currently as I'm migrating/testing things.

[–] [email protected] 7 points 1 year ago

This is my homelab.

Hades Canyon NUC

I7 Intel NUC

Some ubiquiti gear and raspberries.

[–] [email protected] 6 points 1 year ago

Nice, thanks for sharing! Mine looks like this atm:

HS: Mainly Docker containers and VMs
VPS: Wireguard to relay traffic (NAT) to the HS (SSL termination on HS)
UPS in case of power outage
Pi4 for backups within the local network. It also has a disk station for regular air gapped backup.
Pi3 for off site backup
Fire extinguisher nearby in case of emergency ^^

image of my Homelab

[–] [email protected] 5 points 1 year ago

Here is a photo of the inside of the case:

[–] [email protected] 3 points 1 year ago (1 children)

Y'all have fancy labs.

All I have is a HP dl380 Gen8 sitting sideways between my desk and my wife's desk. Its use is now eveng for ccnp studies.

[–] 5redie8 2 points 1 year ago (1 children)

Same! (Although mine might be a G7, forget). What specs are you running in there? Mine has become grossly underpowered for basically anything compared to the electricity it uses, so I haven't turned it on in ages.

[–] [email protected] 2 points 1 year ago

2x Xeon E5-2650 8x 16Gb ram (128 total) 2x 600GB 10K SAS

Thinking of upping the CPU and getting more drives though.

My wife calls it the noise machine for obvious reasons during booting.

[–] [email protected] 1 points 1 year ago* (last edited 1 year ago) (1 children)

Current setup:

2TB Apple Time Capsule
48 port PoE Cicso Catalyst switch
Unifi US8-60W switch
Unifi USG
QNAP 6-bay NAS with 4x 2TB and 2x 4TB WD Gold drives
AT&T ONT and residential gateway box

[–] [email protected] 1 points 1 year ago* (last edited 1 year ago)

Only the one on the top is in use, and as of right now I only have one of the bottom two (gave the other away to a co-worker. If anyone on here is in the Cleveland Ohio area and could use a Cisco UCS C220 M3 for their homelab, reach out.

Unit in use is a Cisco C220 M5SX with 2x Xeon Gold 6132 (56 total threads) and 768GB RAM, 4x 1.2TB SAS drives.

[–] [email protected] 1 points 1 year ago (1 children)

I like it. I’m currently working with a GL.iNet GL-MT300N-V2.

[–] [email protected] 1 points 1 year ago

Now THIS is more my style of cable management

[–] [email protected] 1 points 1 year ago

Nice setup - I’ve been at eying the nanopi r4s for a while to use as fw.

[–] [email protected] 0 points 1 year ago (1 children)

[–] [email protected] 1 points 1 year ago

Nice setup! Someday I will end up with a UDM-Pro...someday.