homeassistant

11701 readers

95 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

[email protected]

alert when aqara temp sensors outside go above or below temp sensor inside (lemmy.world)

submitted 1 year ago by [email protected] to c/[email protected]

8 comments fedilink hide all child comments

Wondering if this is possible. A quick look through the automations and scenes didn’t pop anything out for me, but it would be nice to know when to open and close my windows throughout the summer based on actual local temp now that I’ve got a couple of the Aqara sensors outside.

The idea is that when the temp on both of the outdoor sensors goes below the temp on the inside sensor, in the afternoon/evening, I’d get an alert to open my windows.

And in the morning I’d like an alert to close my windows when the outside temp and inside temp are the same.

top 5 comments

sorted by: hot top controversial new old

[–] [email protected] 5 points 1 year ago (1 children)

Have you tried the "numeric state" trigger? It lets you trigger an automation if one numeric entity is higher or lower than another one.

[–] [email protected] 2 points 1 year ago (2 children)

I’ll take a look. Thanks for the suggestion!

[–] [email protected] 3 points 1 year ago* (last edited 1 year ago)

In isolation a temperature sensor can be “flappy”, so you may want to try and smooth the data to avoid hysteresis. I use the statistics integration to help improve the quality of my sensors.

Have a read of this for inspiration:
https://community.home-assistant.io/t/thermostat-with-hysteresis-smoothing-factor/72729

Using this you would create a calibrated sensor which you would use for automations as SeriousBug suggests.

[–] [email protected] 2 points 1 year ago* (last edited 1 year ago)

[email protected] suggested statistics to smooth the numbers out. I can't reply to his comment for some reason, so I'm trying to reply here: Another option to avoid that issue would be to have the automation check that a > b for 2 minutes, or something like that.

[–] [email protected] 2 points 1 year ago* (last edited 1 year ago)

I have a similar automation setup to notify when the AC is running while the temperature is cooler outside. You could create an automation with a time based trigger (run every 5 mins) with a value template in the Conditions (along with any other conditions like only in the daytime, if blinds are open, etc):

{{ states('sensor.thermostat_current_temperature')|float>state_attr('weather.home', 'temperature')|float }}

And then in Actions: call service - Notifications: send via mobile app

Mine only differs in that it triggers based off the AC turning on.

load more comments