Homelab

371 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 11 months ago

MODERATORS

[email protected]

R740 - Booting from Samsung 980 NVME (alien.top)

submitted 9 months ago by [email protected] to c/[email protected]

5 comments fedilink hide all child comments

Hi all,

I've got a R740xd which I'm trying to use a NVME m.2 drive as its primary boot device. The m.2 drive is a Samsung 980 EVO (PCI 3.0) and is installed into one of the following PCI-E cards (Dell SSD NVMe M.2 PCI-e 2x Solid State Storage Adapter Card 23PX6 NTRCY). The m.2 is detectable by multiple OS's during their installation process so the card is working. As a recent test, I installed Ubuntu on the drive but, as soon as the system reboots, the R740 doesnt detect a boot device. If I go into the boot manager, I can see "ubuntu" listed but its greyed out.

Has anyone had any success booting from a NVME m.2 drive using this PCI card in a R740? Do I need to be using a Dell branded NVME drive instead? Is there something else that I've missed?

top 5 comments

sorted by: hot top controversial new old

[–] [email protected] 1 points 9 months ago (1 children)

You could use Clover boot manager to boot to a nvme disk on that card.

[–] [email protected] 1 points 9 months ago (1 children)

This definitely works quite well even on a r720xd! But as far as i know a r740 should be able to boot directly without the need of clover

[–] [email protected] 1 points 9 months ago

I will consider this if all other avenues fail. But, as you mentioned, surely the R740 can boot directly without requiring clover.

[–] [email protected] 1 points 9 months ago

The R740 should be able to boot from an NVMe drive (whether this is M.2 or U.2).

Is the BIOS set to UEFI boot mode?
Is SecureBoot enabled?
Is there a preffered PCIe slot available for this?
Have you tried another adapter? Not sure if yours is supported.

[–] [email protected] 1 points 9 months ago

So it appears I need to use the following instead: https://www.ebay.com/itm/145432273630