Linux

48052 readers

671 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

121

best foss cad software? (lemmy.ml)

submitted 9 months ago by [email protected] to c/[email protected]

36 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 9 months ago* (last edited 9 months ago)

I've been using SALOME to create parametric 3D geometry. My use case is to parameterize my geometry features and export to STL files that I use with OpenFOAM. SALOME is integrated with a couple of grid generators, and I really like it's 2D/triangulation/STL integration with netgen. You can specify faces for refinement to a desired mesh size, so for example around complex features you can create a fine STL mesh and on simple shapes you can have a really coarse mesh.

I've found the 3D modeling to be pretty straightforward, and SALOME usually does a pretty good job if you have to go back and modify previous features (something I've struggled with in FreeCAD).

I've also used FreeCAD for mesh generation, and it works ok but I've found the triangulation leaves a lot to be desired for splitting up the mesh as needed for OpenFOAM boundaries.

If you're making STL files for 3D printing and you want a parametric CAD modeler for engineering parts, give it a try. If you want complex faces with artistic style, I would suggest Blender.