Homelab

380 readers

9 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

[email protected]

Can Wi-Fi signals affect SBC type device? (alien.top)

submitted 11 months ago by [email protected] to c/[email protected]

4 comments fedilink hide all child comments

I'm Having a strange issue with a LoraWAN Gateway (SBC type device with allwinner H3) running armbian. The gateway would work for several days and then stop all network communication, it would disconnect from the router even though it is wired with an ethernet cable. I also tried to connect directly to the gateway via its fallback IP but the pings would timeout. Sometimes a reboot was all that needed to be done to make it work again.

The gateway is mounted in a 15U glass door network cabinet along with some switches, an Intel Nuc and mainly, an ISP router. The Router was broadcasting Wi-Fi from inside the cabinet and directly below the Nuc and Gateway.

So my question is, could the Wi-Fi signal affect the Gateway and cause this issue? It is to be noted that the Intel Nuc is not at all affected and is working perfectly fine.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 10 months ago

I don't know much about loraWAN but I would check what frequencies it is on. I can't imagine that WiFi would interfere as there are a lot of WiFi signals and LoraWAN wouldn't function well.

I really suspect it is a software bug or some sort of hardware problem.