this post was submitted on 03 Dec 2023
1219 points (99.2% liked)
Memes
45753 readers
1195 users here now
Rules:
- Be civil and nice.
- Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I usually just use high power. I should try this sometime, although I don't tend to have issues with stuff having cold spots. Something I think that helps is stirring stuff half way through and letting it sit for a min after it's done.
Rotating microwaves do a lot better of a job to avoid hot spots.
But it won't do anything to avoid overheating some parts to rubber by overheating or heating too fast.
Stirring definitely helps. The exact setting to use will vary depending on the microwave, what is being heated, and how much of it there is, but my usual go-to for a starting point on a full, regular-sized bowl or plate of food is: 3 minutes at 40%, remove and stir or flip as appropriate, then another 2-3 minutes at 30-40% depending on how hot it was. This approach will end up heating most things evenly without drying them out or burning anything.
Some things can be more sensitive, so if I'm ever unsure about what would be safe, I'll start at 30% for 1 minute just to get a baseline for context. Below 30% is usually only useful for frozen things. Soups usually require several stirs - you don't want to let it sit still for too long, or use too high a setting, or it can explode.